Engine casing -MALOSSI VR-One, reed valve intake- Vespa PX80, PX125, PX150, LML Star/Stella 125/150 Elestart

Preview: Engine casing -MALOSSI VR-One, reed valve intake- Vespa PX80, PX125, PX150, LML Star/Stella 125/150 Elestart

Description

Malossi offers two new reinforced PX125/150 engine cases, V-One and VR-One.
V-One ROTARY SLIDER
The V-One features a rotary slide intake and is aimed at those looking for either a high quality replacement for an original engine case and/or to build a powerful but quiet touring engine.

VR-One MEMBRANE INLET
The VR-One, on the other hand, has an intake with a diaphragm inlet and is primarily aimed at tuners who value high power output. The diaphragm inlet is moved further towards the cylinder, which means that full cheek shafts can also be used (the crank cheeks are no longer completely in the way of the gas flow).

Both housing types are already designed for use with a Malossi 177cc Sport or 177/187cc MHR cylinder. The engine housing is already made to fit in the area of the overflow channels, no more adjustments need to be made. Of course, all other cylinders can also be used on these housings.

Biggest novelty of the Malossi engine housings is the renunciation of loose engine bolts as well as the center seal made of sealing paper. The housing is now assembled with M8 Allen screws, the seal is made with temperature-stable sealant (TIP: anaerobic curing sealant from Loctite).

The housings have reinforcements at all neuralgic points (auxiliary shaft, fivefold bolted crankcase, swingarm and shock absorber mount). Extra material has been added to the sealing surfaces, so tuners can play around to their heart's content.

Silent rubbers on the engine mount and shock absorber mount are included with both types.
Special feature: The PX125/150 Malossi engine cases use the large silent rubbers of the 200cc versions.

Engine case MALOSSI V-One (M5718392)

Reinforced engine case with rotary slide intake
Can be used as a replacement for an original Piaggio engine case (original stock dimensions)
M8 Allen engine bolts
Stud bolts for cylinder and brake pre-assembled
Scope of delivery without intake manifold, without bearing

Engine case MALOSSI VR-One (M5718382)

Reinforced engine case with diaphragm intake
incl. diaphragm intake manifold (360° rotatable for carburetors with Ø30-34mm)
incl. 6 flaps diaphragm
M8 Allen engine screws
incl. crankshaft bearings (Lima 25x52x15mm / clutch 25x62x12mm)
Stud bolts for cylinder and brake pre-assembled

_{AI-translation}

€988.00 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)

P For this item you get fidelity point/s

OEM numbers (for comparison purposes only)
Malossi	5718382, M5718382
Piaggio	8410315

Customers alternatively searched for
5718382 \| M5718382 \| Motorgehäuse \| Motorblock \| Gehäuse \| Block \| Casing \| Triebwerksschalen \| Schalen \| Motorschalen \| Motorhälfte \| Motorhälften \| Gehäusehälfte \| Gehäusehälften \| Engine \| Engine Casing \| Crankcase \| Crank Case \| Motor Case \| Carters Moteur \| Carter \| Cárter Motor \|