Write a review
Evaluations will be activated after verification.
Item successfully added.
Engine casing bolt M7 x 42mm -VESPA- 25-17mm (Smallframe V50, PV125, ET3, PK)
Part no.:
9020181
Description
The Vespa housings are fixed in the classic way, mostly by tie rods. Unlike stud bolts, tie rods are not screwed into the housing, but are guided through a bore hole that runs through both housing parts to be connected, and in the case of the Vespa motors are screwed on one side. The other side of the housing bolt (tie rod) has a head without a wrench but with an anti-twist device.
This technique minimizes the continuous effect on the thread, the torque distribution in the housing is better, but the main advantage is of course the more cost-effective production of the housing, because no threads have to be set here.
AI-translation
This technique minimizes the continuous effect on the thread, the torque distribution in the housing is better, but the main advantage is of course the more cost-effective production of the housing, because no threads have to be set here.
This bolt with 43mm length is the "standard bolt" in all small frame motors like V50, 50N, PV125, ET3, PK etc.
- Models: Smallframe: PK, V50, PV, ET3
- Length: 43mm
- Thread: M7
- Material: Steel, burnished/galvanized
- Scope of delivery: without nut, without washer or snap ring
AI-translation
€1.90 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| OEM numbers (for comparison purposes only) | |
|---|---|
| Piaggio | 008420, 8420, S.8420 |
| Customers alternatively searched for | |
|---|---|
| Motorgehäusebolzen | M7 43 | |
Recently viewed items