Write a review
Evaluations will be activated after verification.
Item successfully added.
Cylinder -SIL 200 cc Stage 4- Lambretta
Part no.:
8001431
Description
Control times: Exhaust 168°, spill 119°, inlet 148°, pre-exhaust 24,5°.
The 200cc Stage 4 cylinder comes from India and is manufactured there as standard with the Stage 4 specification. This means that the timing and cross sections have been optimised without sacrificing everyday practicality.
Despite its slightly sportier design compared to an original cylinder, it still offers a bear power from the rev cellar. This makes it ideal for building a stable touring engine. In combination with a 24mm carburetor and a Clubman exhaust, the engine offers a respectable performance (even with Clubman the engine turns up to 8000 rpm), which allows a cruising speed of about 110kmh.
The engine offers enough power to pull a long SX200 transmission. If you like it a little bit more sporty, you can also use a 30mm carburetor without any problems. If a sport exhaust like a JL is used, even a Stage 4 cylinder is not too far away from the 14kW mark.
All this at a very fair price, which does not overtax even the small purse. After all, the Stage 4 cylinder runs without any problems with an original 22mm carburettor and original exhaust. In any case, we recommend the Indian cylinder head, which is specifically made for this cylinder. It offers the substantially better material, as well as an adapted compression.
In the deposited diagram you see beautifully, how the cylinder grows with the stages of development. Red is the reference run of a completely original Indian 200 cc Stage4 engine. The green curve is the Indian Stage4 with 60 mm shaft, 25 PHBL carburettor and Casa Lambretta Clubman. Blue is the indian Stage4 with revised timing, bgm PWK 24 carburetor and AF Clubman exhaust.
Do you have questions about the diagram or the cylinder: lambretta@scooter-center.com
AI-translation
The 200cc Stage 4 cylinder comes from India and is manufactured there as standard with the Stage 4 specification. This means that the timing and cross sections have been optimised without sacrificing everyday practicality.
Despite its slightly sportier design compared to an original cylinder, it still offers a bear power from the rev cellar. This makes it ideal for building a stable touring engine. In combination with a 24mm carburetor and a Clubman exhaust, the engine offers a respectable performance (even with Clubman the engine turns up to 8000 rpm), which allows a cruising speed of about 110kmh.
The engine offers enough power to pull a long SX200 transmission. If you like it a little bit more sporty, you can also use a 30mm carburetor without any problems. If a sport exhaust like a JL is used, even a Stage 4 cylinder is not too far away from the 14kW mark.
All this at a very fair price, which does not overtax even the small purse. After all, the Stage 4 cylinder runs without any problems with an original 22mm carburettor and original exhaust. In any case, we recommend the Indian cylinder head, which is specifically made for this cylinder. It offers the substantially better material, as well as an adapted compression.
In the deposited diagram you see beautifully, how the cylinder grows with the stages of development. Red is the reference run of a completely original Indian 200 cc Stage4 engine. The green curve is the Indian Stage4 with 60 mm shaft, 25 PHBL carburettor and Casa Lambretta Clubman. Blue is the indian Stage4 with revised timing, bgm PWK 24 carburetor and AF Clubman exhaust.
Do you have questions about the diagram or the cylinder: lambretta@scooter-center.com
AI-translation
This item is currently not available.
€218.00 *
incl. VAT plus shipping costs
The item is ordered and will be in stock soon
P
For this item you get
fidelity point/s
| General | |
|---|---|
| performance class: | sport, standard |
| Gudgeon pins | |
| diameter: | 16 mm |
| Spark plugs | |
| thread type: | M14x1,25 |
| thread spark plug: | long |
| heat rating NGK: | B8ES |
| Cylinders | |
| displacement: | 198 cm³ |
| bore: | 66 mm |
| engine type: | 2-stroke |
| type of cooling: | air cooled |
| material: | cast iron |
| material piston cylinder surface: | cast iron |
| cylinder head inclusive: | |
| cylinder gasket set inclusive: | |
| number of transfers (incl.boost ports): | 2 |
| shape exhaust port: | single port (oval) |
| exhaust mounting: | flange |
| flange type: | 2 studs |
| exhaust bolt pitch: | 67 mm |
| thread exhaust studs: | M7 |
| Crankshafts | |
| stroke: | 58 mm |
| Pistons | |
| number of piston rings: | 3 |
| production method piston: | cast |
| Piston rings | |
| piston ring type: | common ring |
| thickness rings: | 2,0mm |
| Circlips | |
| circlip type: | Seeger-type |
| OEM numbers (for comparison purposes only) | |
| Innocenti | 19611050 |
Please inform me once the product is available again.
| Customers alternatively searched for | |
|---|---|
| Zylinder | Ersatzzylinder | Rennsatz | Hubraumkit | Hubraumsatz | Kubiksatz | Sportzylinder | Sportkit | Tuningzylinder | Tuningsatz | Tuningkit | Bigbore | Rennzylinder | Rennkit | Kit | Cylinder | Kolbenlaufbahn | Laufbahn | Kühlrippen | Laufbuchse | Zylinderlaufbuchse | Barrel | Jug | Cylindre | Cilindro | | |
Related items
Recently viewed items