Write a review
Evaluations will be activated after verification.
Item successfully added.
Cylinder -POLINI 177 cc 3 Ports cast iron (lathed off for PX80 engine casing)- Vespa PX80 (crankshaft PX125 necessary)
Part no.:
3331103
Description
cylinder machined for PX80
AI-translation
CYLINDER
The cylinder kit offered here is originally intended for use on the PX125 engines. To be able to use it on the engine housings of the PX80, the cylinder base diameter was turned by a professional company.
It fits without further modifications in the engines of the Vespa PX80 models.
ATTENTION: The cylinder base of the 172/177cc cylinders is very thin. By turning it by about 1mm it will be further weakened. To prevent damage due to fatigue fractures, we strongly recommend to modify the engine housing (spin out) instead of using a turned cylinder. A good alternative are the 125/150cc and 166cc cylinders. These offer sufficient wall thickness due to their smaller bore to allow them to be used safely in continuous operation with a machined foot.
Crankshaft
The original crankshaft of the PX80 models has only 48mm stroke.
Therefore it must be replaced with a crankshaft of the PX125/150 models with 57mm stroke.
Professionals can also use a PX125/150 racing crankshaft with 60mm stroke.
The then necessary stroke compensation is done by a head or foot seal with 1.5mm (or depending on the desired control angles in e.g. 0.5mm head and 1.0mm foot seal).
AI-translation
This item is currently not available.
€353.00 *
incl. VAT plus shipping costs
The item is ordered and will be in stock soon
P
For this item you get
fidelity point/s
| General | |
|---|---|
| performance class: | sport |
| Gudgeon pins | |
| diameter: | 15 mm |
| Cylinders | |
| type of cooling: | air cooled |
| cylinder head inclusive: | |
| cylinder gasket set inclusive: | |
| diameter exhaust stub: | 37 mm |
| Pistons | |
| production method piston: | cast |
| Cylinder heads | |
| cylinder head type: | one piece |
| OEM numbers (for comparison purposes only) | |
| Polini | 140.0080, P1400080, 1400080, P140.0080 |
Please inform me once the product is available again.
| Customers alternatively searched for | |
|---|---|
| 140.0080 | P1400080 | Zylinder | Ersatzzylinder | Rennsatz | Hubraumkit | Hubraumsatz | Kubiksatz | Sportzylinder | Sportkit | Tuningzylinder | Tuningsatz | Tuningkit | Bigbore | Rennzylinder | Rennkit | Kit | Cylinder | Kolbenlaufbahn | Laufbahn | Kühlrippen | Laufbuchse | Zylinderlaufbuchse | Barrel | Jug | Cylindre | Cilindro | | |
Related items
RECOMMENDED
bgm Pro
BGM1010TR2
Exhaust -BGM PRO BigBox TOURING V2 (BBT2)- Vespa PX80, PX125, PX150, Sprint, GT, GTR
BGM1010TR2
The item is ordered and will be in stock soon
€159.00
*
*incl. VAT plus shipping costs
Alternative items
RECOMMENDED
bgm Pro
BGM1900KT
Tuning kit incl. cylinder and crankshaft -BGM PRO 177/190 cc- Vespa PX125, PX150, Cosa125, Cosa150, GTR125, TS125, Sprint Veloce (VLB1T 0150001-), LML Star 125/150, Stella 125/150
BGM1900KT
The item is ordered and will be in stock soon
€589.00
*
*incl. VAT plus shipping costs
Recently viewed items