Write a review
Evaluations will be activated after verification.
Item successfully added.
Cylinder -PARMAKIT 144 cc W-Force - Vespa PV125, ET3 125, PK125
Part no.:
7672357
Description
The Parmakit W-Force cylinder series is designed for over 25HP ex works. Due to the diaphragm inlet directly on the cylinder, the necessary modifications to the motor housing are minimal. To mount the cylinders, only the foot mounting in the housing has to be enlarged.
The W-Force series has a very cleanly processed aluminium cylinder with Nikasil coating. The W-shaped inlet diaphragm is directly connected to the overflow pockets in the cylinder (boyesen ports). The coated VERTEX forged piston has a 1 mm thin steel ring. The modular head is CNC machined from solid steel for optimum heat dissipation and is very heavy. It is bolted to the cylinder at four additional points, so it is secured 8 times in total. The cylinder has four generously dimensioned main transfer ports and a support channel. The exhaust is divided in two parts.
The full power is, depending on the exhaust, mostly below 10000 rpm, the torque often reaches values above 20Nm. The used crankshaft and clutch should be of very high quality.
AI-translation
+----------+
Manufacturer Information
Parmakit
Strada Antolini 18/C
43044 Lemignano di Collecchio - Italy
https://www.parmakit.com/
info@parmakit.com
Responsible Person for the EU
Parmakit
Strada Antolini 18/C
43044 Lemignano di Collecchio - Italy
https://www.parmakit.com/
info@parmakit.com
The W-Force series has a very cleanly processed aluminium cylinder with Nikasil coating. The W-shaped inlet diaphragm is directly connected to the overflow pockets in the cylinder (boyesen ports). The coated VERTEX forged piston has a 1 mm thin steel ring. The modular head is CNC machined from solid steel for optimum heat dissipation and is very heavy. It is bolted to the cylinder at four additional points, so it is secured 8 times in total. The cylinder has four generously dimensioned main transfer ports and a support channel. The exhaust is divided in two parts.
The full power is, depending on the exhaust, mostly below 10000 rpm, the torque often reaches values above 20Nm. The used crankshaft and clutch should be of very high quality.
The W-Force cylinder is available in these versions:
- 60mm bore, 97mm connecting rod
- 60mm bore, 105mm connecting rod
The versions for 105mm connecting rod are longer at the base, so the otherwise necessary cylinder spacer is already 'built in'. The advantage of the longer connecting rod is that the housing of the 60mm versions does not have to be spindled out as deep and therefore remains more stable. Furthermore, the pre-compression is reduced and the necessary modifications to the engine housing for the adjustment of the overflow channels are greatly reduced. Also shafts with 54mm stroke can be installed, for this purpose the required thickness of the balancing gasket(s) / spacer must be determined individually.
Due to the large distance of the exhaust studs and the extended cross section, only exhaust systems manufactured accordingly will fit!
Our peripherals recommended for this kit can be found under "Accessories".
- Recommended squeezing edge: 1.30mm
- Exhaust stud spacing: 62mm (8mm studs)
- Exhaust diameter: 36mm
- stroke: 51mm
- exhaust width inside: 82% of the bore
- double cylinder head bolting
- centred combustion chamber calotte
- carburator connection width: 45mm (carburettor size 34-41mm)
spindle dimensions: - 60mm / 144cc (97mm connecting rod): Ø 65.0mm, 20mm deep
- 60mm / 144cc (105mm connecting rod): Ø 65.5mm, 7.5mm deep
BITTE NOTE: The frame cut-out in the area of the intake manifold must be be modified/extended
AI-translation
+----------+
Manufacturer Information
Parmakit
Strada Antolini 18/C
43044 Lemignano di Collecchio - Italy
https://www.parmakit.com/
info@parmakit.com
Responsible Person for the EU
Parmakit
Strada Antolini 18/C
43044 Lemignano di Collecchio - Italy
https://www.parmakit.com/
info@parmakit.com
€653.00 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| General | |
|---|---|
| performance class: | racing |
| Gudgeon pins | |
| diameter: | 15 mm |
| Spark plugs | |
| thread type: | M14x1,25 |
| thread spark plug: | long |
| heat rating NGK: | B9ES |
| Cylinders | |
| displacement: | 144 cm³ |
| bore: | 60 mm |
| engine type: | 2-stroke |
| type of cooling: | air cooled |
| material: | aluminium |
| material piston cylinder surface: | Ceramic |
| cylinder head inclusive: | |
| cylinder gasket set inclusive: | |
| number of transfers (incl.boost ports): | 5 |
| number of boost ports: | 1 |
| shape exhaust port: | dual port |
| exhaust mounting: | flange |
| flange type: | 2 studs |
| exhaust bolt pitch: | 62 mm |
| thread exhaust studs: | M8 |
| Crankshafts | |
| stroke: | 51 mm |
| Pistons | |
| number of piston rings: | 1 |
| production method piston: | cast |
| Piston rings | |
| piston ring type: | common ring |
| thickness rings: | 1,0mm |
| Circlips | |
| circlip type: | C-type |
| wire size of circlip: | 1,0mm |
| Cylinder heads | |
| cylinder head type: | multiple piece |
| Customers alternatively searched for | |
|---|---|
| Zylinder | Ersatzzylinder | Rennsatz | Hubraumkit | Hubraumsatz | Kubiksatz | Sportzylinder | Sportkit | Tuningzylinder | Tuningsatz | Tuningkit | Bigbore | Rennzylinder | Rennkit | Kit | Cylinder | Kolbenlaufbahn | Laufbahn | Kühlrippen | Laufbuchse | Zylinderlaufbuchse | Barrel | Jug | Cylindre | Cilindro | | |
Related items
OEM-Qualität
7671928
Circlip for gudgeon pin -15mm x 1.00mm- C type
7671928
The item is ordered and will be in stock soon
€0.80
*
*incl. VAT plus shipping costs
Fabbri Racing
FR0090
Gear cluster set incl. 4th gear with 47 teeth -FABBRI RACING Triangular/Polygon- Vespa V50, PV125, ET3, PK50, PK80, PK125 S-XL/XL2 - 10-14-17-19 teeth
FR0090
The item is ordered and will be in stock soon
€283.01
*
*incl. VAT plus shipping costs
RECOMMENDED
Egig Performance
3334020
Exhaust -EGIG PERFORMANCE Unisex 125-170ccm, Ø=32mm (54-60mm stud spacing), screwed xxl rear silencer (Ø70mm) - Vespa ET3, PV125 (also suitable for vehicles with luggage compartment in the left side bonnet)
3334020
The item is ordered and will be in stock soon
€389.00
*
*incl. VAT plus shipping costs
Ersatzteile
OEM-Qualität
7671928
Circlip for gudgeon pin -15mm x 1.00mm- C type
7671928
The item is ordered and will be in stock soon
€0.80
*
*incl. VAT plus shipping costs
Recently viewed items