Cylinder -MALOSSI 172 cc- Vespa T5 125cc

Preview: Cylinder -MALOSSI 172 cc- Vespa T5 125cc

Description

Like the original cylinder, the 172cc Malossi is made of aluminium and has a highly wear-resistant GiNiSil ceramic coating. Together with the very stable piston the Malossi kit is therefore extremely durable and resilient.

The Malossi has already longer control angles (approx. 120°/176°) than the original cylinder, but in combination with the original exhaust it remains an absolute torque steamer, which delivers its full torque at just over 4500 rpm. Already at 4000 rpm it delivers 8NM more torque than the original cylinder. So it remains the unbeaten traffic light king. Full power is also available below 6000rpm, but you can turn the cylinder much further. Only at 7500 rpm the Malossi drops to below 12hp, the value that the original cylinder can deliver at maximum. Malossi indicates that the 172 can be driven with the original cylinder head. More recommendable is a modified original head, which is no longer produced.
Therefore a MMW cylinder head milled from the full head is the better alternative to allow a possible retrofit.

If the cylinder is simply put on the engine, ie no further revisions are made, the cylinder already reaches a full 16hp and over 20NM. To convert this power into speed, at least one clutch pinion with 22 teeth should be used. Alternatively there is also a special 23 tooth sprocket from DRT for the original 68 tooth primary gear.

Who wants to get more out of the Malossi can extend the crankshaft opening time. Malossi gives here a recommended opening angle at the inlet of 110° b.o.t. to 72° n.o.t. In combination with a bigger carburettor (TMX30, PWK28, PHBH28) this allows to get more power out of the Malossi. Especially in combination with a strong resonance exhaust the tuning of the carburettor is much easier than with the original SI24/24G carburettor.
A matching LTH BT5 or RZ MK II exhaust can be used.

_{AI-translation}

+----------+
Manufacturer Information
Malossi
Via Roma 118
40012 Calderara di Reno - Italy
https://www.malossi.com/
info@malossi.com

Responsible Person for the EU
Malossi
Via Roma 118
40012 Calderara di Reno - Italy
https://www.malossi.com/
info@malossi.com

This item is currently not available.

€421.00 *

incl. VAT plus shipping costs

The item is ordered and will be in stock soon

P For this item you get fidelity point/s

General
performance class:	sport
Gudgeon pins
diameter:	16 mm
Spark plugs
thread type:	M14x1,25
thread spark plug:	short
heat rating NGK:	B8HS
Cylinders
displacement:	172 cm³
bore:	65 mm
engine type:	2-stroke
type of cooling:	air cooled
material:	aluminium
material piston cylinder surface:	Ceramic
cylinder head inclusive:
cylinder gasket set inclusive:
shape exhaust port:	single port (oval)
exhaust mounting:	flange
flange type:	with cone
Crankshafts
stroke:	52 mm
Pistons
number of piston rings:	2
production method piston:	cast
Piston rings
piston ring type:	keystone ring
thickness rings:	1,2mm
Circlips
circlip type:	C-type
wire size of circlip:	1,0mm
Cylinder heads
cylinder head type:	one piece
OEM numbers (for comparison purposes only)
Malossi	M315102, 315102

Please inform me once the product is available again.

Customers alternatively searched for
315102 \| M315102 \| Zylinder \| Ersatzzylinder \| Rennsatz \| Hubraumkit \| Hubraumsatz \| Kubiksatz \| Sportzylinder \| Sportkit \| Tuningzylinder \| Tuningsatz \| Tuningkit \| Bigbore \| Rennzylinder \| Rennkit \| Kit \| Cylinder \| Kolbenlaufbahn \| Laufbahn \| Kühlrippen \| Laufbuchse \| Zylinderlaufbuchse \| Barrel \| Jug \| Cylindre \| Cilindro \|