Write a review
Evaluations will be activated after verification.
Item successfully added.
Crankshaft -TAMENI Standard- Vespa Wideframe 125cc (1954-1957) VM2, VN1, VN2, ACMA- direct intake, full circle web, stroke=54mm, conrod=110mm, conrod pin Ø=21mm, gudgeon pin Ø=15mm (conrod small end bushing)
Part no.:
GB186
Description
High-quality reproduction of the crankshaft type for the old Vespas with nose piston and direct intake at the cylinder.
This was used in the vehicles which still had only a two-digit chassis prefix (VN, VM, VL, VB)
AI-translation
+----------+
Manufacturer Information
Tameni
Via Scorine 34
25050 Ome BS - Italy
https://ppf-srl.com
ppfsrlit@pec.it
Responsible Person for the EU
Tameni
Via Scorine 34
25050 Ome BS - Italy
https://ppf-srl.com
ppfsrlit@pec.it
This was used in the vehicles which still had only a two-digit chassis prefix (VN, VM, VL, VB)
- intake type: slot-controlled cylinder intake
- crankshaft type: Full cheek
- stroke: 54.0mm
- conrod: 110.0mm
- piston pin Ø: 15mm
- conrod pin bottom Ø: 20mm
AI-translation
+----------+
Manufacturer Information
Tameni
Via Scorine 34
25050 Ome BS - Italy
https://ppf-srl.com
ppfsrlit@pec.it
Responsible Person for the EU
Tameni
Via Scorine 34
25050 Ome BS - Italy
https://ppf-srl.com
ppfsrlit@pec.it
€188.90 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| Bearings | |
|---|---|
| sizes: | 15mm |
| Gudgeon pins | |
| diameter: | 15 mm |
| Crankshafts | |
| stroke: | 54 mm |
| thread rotor side: | M11x1,5 right-hand thread |
| thread drive side: | M12x1,5 right-hand thread |
| diameter crankwebs: | 93 mm |
| pivot length rotor side: | 34 mm |
| pivot length drive side: | 22 mm |
| width crankwebs: | 34 mm |
| overall width: | 165 mm |
| diameter bearing seat rotor side: | 25 mm |
| diameter bearing seat drive side: | 25 mm |
| diameter oil seal seat rotor side: | 20 mm |
| diameter oil seal seat drive side: | 20 mm |
| width bearing seat rotor side: | 12 mm |
| width bearing seat drive side: | 12 mm |
| width oil seal seat rotor side: | 8 mm |
| width oil seal seat drive side: | 8 mm |
| full circle crankshaft: | |
| rotary valve crankshaft: | |
| crankcase has to be milled: | |
| engine casing has to be modified: | |
| Connecting rods | |
| length connecting rod: | 110 mm |
| thickness connecting rod: | 5.4 mm |
| diameter small end connecting rod eye: | 15 mm |
| lubricating hole at small end bearing: | yes |
| diameter crankpin: | 18 mm |
| lubricating hole at crankpin bearing: | slot |
| crankpin shims: | no |
| OEM numbers (for comparison purposes only) | |
| Piaggio | 025916, 25916, 59268 |
| Customers alternatively searched for | |
|---|---|
| Kurbelwelle | Krukas | Vilebrequin | Cigüeñal | Albero | Crankshaft | Crank | Albero Motore | De círculo completo | | |
Related items
RECOMMENDED
Vape
BGM945ASS
Ignition -VAPE Touring , AC- Vespa Wideframe V15T, V30T, V33T, VM1T, VM2T, VN1T, ACMA -V54, Ø98mm
BGM945ASS
The item is ordered and will be in stock soon
€339.00
*
*incl. VAT plus shipping costs
Recently viewed items