Write a review
Evaluations will be activated after verification.
Item successfully added.
Crankshaft -STANDARD (rotary valve), 51mm stroke, 97mm conrod- Vespa PK125 XL2, PK125 ETS (Ø=24mm cone)
Part no.:
1610005
Description
The ETS crankshaft is taken from the PK125 sports model of the same name, and with 8.5 hp it has the most powerful engine of the Smallframe models. Therefore it has an extra strong cone stub and offers a very stable base, also for tuned engines. Supporting for a sporty oriented engine is the relatively long opening angle of the inlet rotary valve for a standard crankshaft. This allows the ETS crankshaft to use much larger carburettors than the Ø20mm stock carburettor. A revision of the intake window in the engine housing to the desired control angles rewards the engine with a further increase in power.
SPECIALITY
The PK125 ETS crankshaft uses a generator-side crankshaft needle bearing with Ø25mm inner diameter (original ETS = 25x38x15mm) due to the reinforcement. If the crankshaft is to be installed in a V50, PV125, ET3 or similar small frame engine, a special conversion bearing is necessary (ball bearing 25x47x12mm). Alternatively we offer an adapter ring for shrink fitting. This allows the use of the standard bearing of the ETS models.
In addition, if not already available, a suitable pole wheel for the large cone and the matching ignition is necessary. We offer here complete conversion kits (all pole wheels/ignitions for engines with 20mm cone fit).
(US)
AI-translation
+----------+
Manufacturer Information
Mazzucchelli
Via XXV Aprile 304
21044 Cavaria - Italy
https://www.nuovamazzucchelli.com/
info@nuovamazzucchelli.com
Responsible Person for the EU
Mazzucchelli
Via XXV Aprile 304
21044 Cavaria - Italy
https://www.nuovamazzucchelli.com/
info@nuovamazzucchelli.com
€108.94 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| Bearings | |
|---|---|
| sizes: | 15x19x20mm |
| Gudgeon pins | |
| diameter: | 15 mm |
| Crankshafts | |
| stroke: | 51 mm |
| thread rotor side: | M12x1,25 right-hand thread |
| thread drive side: | M10x1,5 right-hand thread |
| diameter crankwebs: | 87 mm |
| width crankwebs: | 37.8 mm |
| diameter bearing seat rotor side: | 25 mm |
| diameter bearing seat drive side: | 17 mm |
| diameter oil seal seat rotor side: | 24 mm |
| diameter oil seal seat drive side: | 22.7 mm |
| full circle crankshaft: | |
| rotary valve crankshaft: | |
| length rotary crankweb: | 179 mm |
| Vespa V50, PV - intake timing for short rotary surface (22mm) (°): | 153 |
| Vespa PK XL2, ETS - intake timing for long rotary surface (28mm) (°): | 161 |
| Vespa PK XL2, ETS - intake timing for long rotary surface (37mm fully modified) (°): | 174 |
| crankcase has to be milled: | |
| engine casing has to be modified: | |
| Connecting rods | |
| length connecting rod: | 97 mm |
| thickness connecting rod: | 5 mm |
| diameter small end connecting rod eye: | 19 mm |
| lubricating hole at small end bearing: | no |
| diameter crankpin: | 20 mm |
| lubricating hole at crankpin bearing: | no |
| crankpin shims: | yes |
| Customers alternatively searched for | |
|---|---|
| Crankshaft | Crank | Kurbelwelle | Krukas | Vilebrequin | Cigüeñal | Albero | Albero Motore | Drehschieber | Vanne Rotative | Válvula Rotativa | Valvola A Disco Rotante | Rotary Valve | |
Related items
LML
1800030
Extractor -VESPA- bearing ring of bearing type NBI253815 (25x38x15mm) ignition side PX, Cosa, Sprint Veloce, LML 2-stroke, PK125 ETS
1800030
The item is ordered and will be in stock soon
€68.95
*
*incl. VAT plus shipping costs
Ersatzteile
Recently viewed items