Write a review
Evaluations will be activated after verification.
Item successfully added.
Crankshaft -STANDARD 58 mm stroke, 107 mm con rod- Lambretta LI-SX
Part no.:
8070000
Description
Our standard crankshafts are a low-cost replacement for worn ones. The high quality bearings and matching tolerances make the shaft a faithful companion.
The LI-SX standard shaft is a direct replacement for all Series 3 Lambrettas (except the DL/GP series) and almost all Series 2 models (only very early models still have the pressed bronze bush in the upper connecting rod eye, as is the case with Series 1).
It is also a great replacement for all Lambrettas that still have the upper bush as connecting rod bearing. This gives up the spirit at the slightest increase in performance.
AI-translation
The LI-SX standard shaft is a direct replacement for all Series 3 Lambrettas (except the DL/GP series) and almost all Series 2 models (only very early models still have the pressed bronze bush in the upper connecting rod eye, as is the case with Series 1).
It is also a great replacement for all Lambrettas that still have the upper bush as connecting rod bearing. This gives up the spirit at the slightest increase in performance.
AI-translation
€168.94 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| Bearings | |
|---|---|
| sizes: | 16x20x20mm |
| Gudgeon pins | |
| diameter: | 16 mm |
| Crankshafts | |
| stroke: | 58 mm |
| thread rotor side: | M12x1,0 left-hand thread |
| thread drive side: | M8x1,0 right-hand thread |
| diameter crankwebs: | 95.6 mm |
| width crankwebs: | 40.5 mm |
| diameter bearing seat rotor side: | 25 mm |
| diameter bearing seat drive side: | 25 mm |
| diameter oil seal seat rotor side: | 33 mm |
| diameter oil seal seat drive side: | 33 mm |
| full circle crankshaft: | |
| rotary valve crankshaft: | |
| crankcase has to be milled: | |
| engine casing has to be modified: | |
| diameter variator pivot: | 17.9 mm |
| variator pivot type: | toothed |
| Connecting rods | |
| length connecting rod: | 107 mm |
| thickness connecting rod: | 5.4 mm |
| diameter small end connecting rod eye: | 20 mm |
| lubricating hole at small end bearing: | yes |
| diameter crankpin: | 20 mm |
| lubricating hole at crankpin bearing: | slot |
| crankpin shims: | yes |
| OEM numbers (for comparison purposes only) | |
| Innocenti | 19612150, 19912190, 19012010 |
| Customers alternatively searched for | |
|---|---|
| Kurbelwelle | Krukas | Vilebrequin | Cigüeñal | Albero | Crankshaft | Crank | Albero Motore | |
Related items
RECOMMENDED
bgm Pro
BGM1141
Oil seal set engine -BGM PRO, FKM (E10/etahnol resistant)- Lambretta LI 125-150 (Serie 2-3), LIS, SX, TV (Serie 2-3), GP/DL
BGM1141
The item is ordered and will be in stock soon
€37.90
*
*incl. VAT plus shipping costs
Alternative items
Tameni
8070000N
Crankshaft -TAMENI Racing 58mm stroke, 107mm conrod- Lambretta LI-SX
8070000N
The item is ordered and will be in stock soon
€289.00
*
*incl. VAT plus shipping costs
Recently viewed items