Write a review
Evaluations will be activated after verification.
Item successfully added.
Crankshaft -STANDARD 58 mm stroke, 107 mm con rod- Lambretta DL/GP
Part no.:
8070001
Description
Our standard crankshafts are a low-cost replacement for worn ones. The high quality bearings and matching tolerances make the shaft a loyal companion.
These crankshafts are the same as those used in the dl/GP series. Thanks to the thicker stub shaft for the polar wheel support, the risk of the stub shearing is reduced to a minimum.
The bearing can withstand even some slight measures to increase performance.
AI-translation
+----------+
Manufacturer Information
Mazzucchelli
Via XXV Aprile 304
21044 Cavaria - Italy
https://www.nuovamazzucchelli.com/
info@nuovamazzucchelli.com
Responsible Person for the EU
Mazzucchelli
Via XXV Aprile 304
21044 Cavaria - Italy
https://www.nuovamazzucchelli.com/
info@nuovamazzucchelli.com
These crankshafts are the same as those used in the dl/GP series. Thanks to the thicker stub shaft for the polar wheel support, the risk of the stub shearing is reduced to a minimum.
The bearing can withstand even some slight measures to increase performance.
AI-translation
+----------+
Manufacturer Information
Mazzucchelli
Via XXV Aprile 304
21044 Cavaria - Italy
https://www.nuovamazzucchelli.com/
info@nuovamazzucchelli.com
Responsible Person for the EU
Mazzucchelli
Via XXV Aprile 304
21044 Cavaria - Italy
https://www.nuovamazzucchelli.com/
info@nuovamazzucchelli.com
€168.90 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| Bearings | |
|---|---|
| sizes: | 16x20x20mm |
| Gudgeon pins | |
| diameter: | 16 mm |
| Crankshafts | |
| stroke: | 58 mm |
| thread rotor side: | M12x1,0 left-hand thread |
| thread drive side: | M8x1,0 right-hand thread |
| diameter crankwebs: | 95.9 mm |
| width crankwebs: | 40.5 mm |
| diameter bearing seat rotor side: | 25 mm |
| diameter bearing seat drive side: | 25 mm |
| diameter oil seal seat rotor side: | 33 mm |
| diameter oil seal seat drive side: | 33 mm |
| full circle crankshaft: | |
| rotary valve crankshaft: | |
| crankcase has to be milled: | |
| engine casing has to be modified: | |
| diameter variator pivot: | 17.9 mm |
| variator pivot type: | toothed |
| Connecting rods | |
| length connecting rod: | 107 mm |
| diameter small end connecting rod eye: | 20 mm |
| OEM numbers (for comparison purposes only) | |
| Innocenti | 22212150, 22012190 |
| Customers alternatively searched for | |
|---|---|
| Kurbelwelle | Krukas | Vilebrequin | Cigüeñal | Albero | Crankshaft | Crank | Albero Motore | |
Related items
Ersatzteile
Recently viewed items