Write a review
Evaluations will be activated after verification.
Item successfully added.
Crankshaft -RACING, 51mm stroke, 97mm conrod- Vespa PK125 XL2, PK125 ETS (Ø=24mm cone)
Part no.:
1610010
Description
In order to achieve higher speeds, one should reach for the racing shaft. The extended intake timing results in a much freer engine revs. This measure is especially noticeable with high-revving cylinders.
The quality of the crankshafts is very good and so they resist even highest revs. Especially for the higher capacity engines from 125ccm up they are an optimal supplement to extend the usable speed range of racing cylinders without spitback in the lower speed range.
The quality of the crankshafts is very good and so they resist even highest revs. Especially for the higher capacity engines from 125ccm up they are an optimal supplement to extend the usable speed range of racing cylinders without spitback in the lower speed range.
The PK XL2, ETS 125 shaft also offers the enormous advantage that it has the most stable cone and can therefore cope with much higher forces. In addition, it allows the use of ultra-light pole wheels, with which a better acceleration behaviour can be achieved.
AI-translation
This item is currently not available.
€125.00 *
incl. VAT plus shipping costs
The item is ordered and will be in stock soon
P
For this item you get
fidelity point/s
| Bearings | |
|---|---|
| sizes: | 15x19x20mm |
| Gudgeon pins | |
| diameter: | 15 mm |
| Crankshafts | |
| stroke: | 51 mm |
| thread rotor side: | M12x1,25 right-hand thread |
| thread drive side: | M10x1,5 right-hand thread |
| diameter crankwebs: | 87 mm |
| width crankwebs: | 37.9 mm |
| diameter bearing seat rotor side: | 25 mm |
| diameter bearing seat drive side: | 17 mm |
| diameter oil seal seat rotor side: | 24 mm |
| diameter oil seal seat drive side: | 22.7 mm |
| full circle crankshaft: | |
| rotary valve crankshaft: | |
| length rotary crankweb: | 163 mm |
| Vespa V50, PV - intake timing for short rotary surface (22mm) (°): | 174 |
| Vespa PK XL2, ETS - intake timing for long rotary surface (28mm) (°): | 182 |
| Vespa PK XL2, ETS - intake timing for long rotary surface (37mm fully modified) (°): | 195 |
| crankcase has to be milled: | |
| engine casing has to be modified: | |
| Connecting rods | |
| length connecting rod: | 97 mm |
| thickness connecting rod: | 4.4 mm |
| diameter small end connecting rod eye: | 19 mm |
| lubricating hole at small end bearing: | no |
| diameter crankpin: | 20 mm |
| lubricating hole at crankpin bearing: | notch |
| crankpin shims: | yes |
Please inform me once the product is available again.
| Customers alternatively searched for | |
|---|---|
| Crankshaft | Crank | Kurbelwelle | Krukas | Vilebrequin | Cigüeñal | Albero | Albero Motore | Drehschieber | Vanne Rotative | Válvula Rotativa | Valvola A Disco Rotante | Rotary Valve | |
Related items
LML
1800030
Extractor -VESPA- bearing ring of bearing type NBI253815 (25x38x15mm) ignition side PX, Cosa, Sprint Veloce, LML 2-stroke, PK125 ETS
1800030
The item is ordered and will be in stock soon
€68.95
*
*incl. VAT plus shipping costs
Ersatzteile
Recently viewed items