Write a review
Evaluations will be activated after verification.
Item successfully added.
Crankshaft -MAZZUCCHELLI Standard (rotary valve)- Vespa V50, PK50 S (Ø=19mm cone)
Part no.:
1610001
Description
The standard crankshafts for the V50 are very well suited to replace the old original shafts, with bushings instead of needle bearings in the upper connecting rod eye. This brings a strongly increased life span of the engine with itself, since the connecting rod bushings become frequently unround, and/or deflect with the time.
AI-translation
+----------+
Manufacturer Information
Mazzucchelli
Via XXV Aprile 304
21044 Cavaria - Italy
https://www.nuovamazzucchelli.com/
info@nuovamazzucchelli.com
Responsible Person for the EU
Mazzucchelli
Via XXV Aprile 304
21044 Cavaria - Italy
https://www.nuovamazzucchelli.com/
info@nuovamazzucchelli.com
TIP:
For cylinders starting from 75cc capacity directly a broader upper connecting rod bearing also order! (see "Accessories")
AI-translation
+----------+
Manufacturer Information
Mazzucchelli
Via XXV Aprile 304
21044 Cavaria - Italy
https://www.nuovamazzucchelli.com/
info@nuovamazzucchelli.com
Responsible Person for the EU
Mazzucchelli
Via XXV Aprile 304
21044 Cavaria - Italy
https://www.nuovamazzucchelli.com/
info@nuovamazzucchelli.com
€107.94 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| Bearings | |
|---|---|
| sizes: | 12x17x13mm |
| Gudgeon pins | |
| diameter: | 12 mm |
| Crankshafts | |
| stroke: | 43 mm |
| thread rotor side: | M10x1,5 right-hand thread |
| thread drive side: | M10x1,5 right-hand thread |
| diameter crankwebs: | 87 mm |
| width crankwebs: | 37.6 mm |
| diameter bearing seat rotor side: | 20 mm |
| diameter bearing seat drive side: | 17 mm |
| diameter oil seal seat rotor side: | 19 mm |
| diameter oil seal seat drive side: | 22.7 mm |
| full circle crankshaft: | |
| rotary valve crankshaft: | |
| length rotary crankweb: | 201 mm |
| Vespa V50, PV - intake timing for short rotary surface (22mm) (°): | 117 |
| Vespa PK XL2, ETS - intake timing for long rotary surface (28mm) (°): | 123 |
| Vespa PK XL2, ETS - intake timing for long rotary surface (37mm fully modified) (°): | 133 |
| crankcase has to be milled: | |
| engine casing has to be modified: | |
| Connecting rods | |
| length connecting rod: | 97 mm |
| thickness connecting rod: | 4.8 mm |
| diameter small end connecting rod eye: | 17 mm |
| lubricating hole at small end bearing: | yes |
| diameter crankpin: | 20 mm |
| lubricating hole at crankpin bearing: | notch |
| crankpin shims: | yes |
| OEM numbers (for comparison purposes only) | |
| Piaggio | 224587, 2245875, 1961056, 90203, 112154 |
| Customers alternatively searched for | |
|---|---|
| Crankshaft | Crank | Kurbelwelle | Krukas | Vilebrequin | Cigüeñal | Albero | Albero Motore | Drehschieber | Vanne Rotative | Válvula Rotativa | Valvola A Disco Rotante | Rotary Valve | |
Related items
Italkit
7671695
Small end needle bearing -ITALKIT (12x17x15mm)- Piaggio 50cc, Vespa 50cc - silver cage
7671695
The item is ordered and will be in stock soon
€14.35
*
*incl. VAT plus shipping costs
Alternative items
Ersatzteile
Italkit
7671695
Small end needle bearing -ITALKIT (12x17x15mm)- Piaggio 50cc, Vespa 50cc - silver cage
7671695
The item is ordered and will be in stock soon
€14.35
*
*incl. VAT plus shipping costs
Recently viewed items