Write a review
Evaluations will be activated after verification.
Item successfully added.
Crankshaft -MAZZUCCHELLI Racing (rotary valve)- Vespa PX125, PX150
Part no.:
1620003
Description
In order to achieve higher speeds, one should reach for the racing shaft. The extended intake timing results in a much freer engine revs. This measure is especially noticeable with high-revving cylinders.
The quality of the crankshafts is very good and so they resist even the highest revs. Especially for engines with a larger displacement, they are an optimal supplement to extend the usable speed range.
These engines turn out freely, which leads to a significant increase in top speed.
AI-translation
The quality of the crankshafts is very good and so they resist even the highest revs. Especially for engines with a larger displacement, they are an optimal supplement to extend the usable speed range.
These engines turn out freely, which leads to a significant increase in top speed.
AI-translation
€169.00 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| Bearings | |
|---|---|
| sizes: | 15x19x20mm |
| Gudgeon pins | |
| diameter: | 15 mm |
| Crankshafts | |
| stroke: | 57 mm |
| thread rotor side: | M12x1,25 right-hand thread |
| thread drive side: | M12x1,5 right-hand thread |
| diameter crankwebs: | 98 mm |
| width crankwebs: | 38.8 mm |
| diameter bearing seat rotor side: | 25 mm |
| diameter bearing seat drive side: | 25 mm |
| diameter oil seal seat rotor side: | 24 mm |
| diameter oil seal seat drive side: | 31 mm |
| full circle crankshaft: | |
| rotary valve crankshaft: | |
| length rotary crankweb: | 193 mm |
| Vespa PX125-150 - intake timing for long rotary surface (33mm) (°): | 172 |
| Vespa PX125-150 - intake timing for short rotary surface (53mm fully modified) (°): | 196 |
| crankcase has to be milled: | |
| engine casing has to be modified: | |
| Connecting rods | |
| length connecting rod: | 105 mm |
| thickness connecting rod: | 5.3 mm |
| diameter small end connecting rod eye: | 19 mm |
| lubricating hole at small end bearing: | no |
| diameter crankpin: | 22 mm |
| lubricating hole at crankpin bearing: | notch |
| crankpin shims: | yes |
| Customers alternatively searched for | |
|---|---|
| Crankshaft | Crank | Kurbelwelle | Krukas | Vilebrequin | Cigüeñal | Albero | Albero Motore | Drehschieber | Vanne Rotative | Válvula Rotativa | Valvola A Disco Rotante | Rotary Valve | | |
Related items
bgm Pro
BGM1200TL
Bearing dummy crankshaft -BGM PRO- 613912 (25x62x12mm) - (used for crankshaft, drive side Vespa PX, T5 125cc, Rally180 (VSD1T), Rally200 (VSE1T), Sprint, GS150/GS3... - crankshaft, flywheel side, Sprint, GS150/GS3, VNA, VNB, VBA, VBB...)
BGM1200TL
The item is ordered and will be in stock soon
€12.30
*
*incl. VAT plus shipping costs
LML
1800030
Extractor -VESPA- bearing ring of bearing type NBI253815 (25x38x15mm) ignition side PX, Cosa, Sprint Veloce, LML 2-stroke, PK125 ETS
1800030
The item is ordered and will be in stock soon
€68.95
*
*incl. VAT plus shipping costs
Piaggio
1022313
Cluch nut tab washer -PIAGGIO- all Vespa Largeframe models (-1995) - clutch nut
1022313
The item is ordered and will be in stock soon
€2.59
*
*incl. VAT plus shipping costs
bgm Pro
BGM1034
Oil seal 31x62,1x5,8/4,3mm -BGM PRO FKM (E10/etahnol resistant) Metall, braun (used for crankshaft drive side Vespa PX (since 1984), T5 125cc, Cosa)
BGM1034
The item is ordered and will be in stock soon
€11.90
*
*incl. VAT plus shipping costs
RECOMMENDED
Kingwelle
KW0041
Clutch -KINGWELLE DragBikeClutch aluminium version- Vespa PX, T5, Rally, Cosa
KW0041
The item is ordered and will be in stock soon
€577.99
*
*incl. VAT plus shipping costs
Ersatzteile
Recently viewed items