Write a review
Evaluations will be activated after verification.
Item successfully added.
Crankshaft -MAZZUCCHELLI RACING (reed valve intake) full circle web (57mm)- Vespa PX125, PX150
Part no.:
1620005
Description
Crankshaft -MAZZUCCHELLI RACING full cheek (57mm)
The full cheek shafts were primarily developed to improve the pre-compression ratio and thus to increase the cylinder filling via the increased pressure in the crankcase. However, by installing the full cheek, the effective cross-section of the intake tract is greatly reduced. This considerably reduces the possible degree of filling in the upper speed range, and engines equipped with such a crankshaft usually drop sharply in power at 7,000 rpm. The shaft has lubrication holes at the top of the connecting rod eye, balance weights and a streamlined blade connecting rod. Mazzucchelli's high-end crankshaft with 57mm stroke /105mm connecting rod.
(TW101121)
€224.01 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| Bearings | |
|---|---|
| sizes: | 15x19x20mm |
| Gudgeon pins | |
| diameter: | 15 mm |
| Crankshafts | |
| stroke: | 57 mm |
| thread rotor side: | M12x1,25 right-hand thread |
| thread drive side: | M12x1,5 right-hand thread |
| diameter crankwebs: | 98 mm |
| diameter bearing seat rotor side: | 25 mm |
| diameter bearing seat drive side: | 25 mm |
| diameter oil seal seat rotor side: | 24 mm |
| diameter oil seal seat drive side: | 31 mm |
| full circle crankshaft: | |
| filling material for full circle: | steel |
| rotary valve crankshaft: | |
| crankcase has to be milled: | |
| engine casing has to be modified: | |
| Connecting rods | |
| length connecting rod: | 105 mm |
| diameter small end connecting rod eye: | 19 mm |
| Customers alternatively searched for | |
|---|---|
| Kurbelwelle | Krukas | Vilebrequin | Cigüeñal | Albero | Crankshaft | Crank | Albero Motore | De círculo completo | | |
Related items
bgm Pro
BGM1200TL
Bearing dummy crankshaft -BGM PRO- 613912 (25x62x12mm) - (used for crankshaft, drive side Vespa PX, T5 125cc, Rally180 (VSD1T), Rally200 (VSE1T), Sprint, GS150/GS3... - crankshaft, flywheel side, Sprint, GS150/GS3, VNA, VNB, VBA, VBB...)
BGM1200TL
The item is ordered and will be in stock soon
€12.30
*
*incl. VAT plus shipping costs
LML
1800030
Extractor -VESPA- bearing ring of bearing type NBI253815 (25x38x15mm) ignition side PX, Cosa, Sprint Veloce, LML 2-stroke, PK125 ETS
1800030
The item is ordered and will be in stock soon
€68.95
*
*incl. VAT plus shipping costs
Piaggio
1022313
Cluch nut tab washer -PIAGGIO- all Vespa Largeframe models (-1995) - clutch nut
1022313
The item is ordered and will be in stock soon
€2.59
*
*incl. VAT plus shipping costs
bgm Pro
BGM1034
Oil seal 31x62,1x5,8/4,3mm -BGM PRO FKM (E10/etahnol resistant) Metall, braun (used for crankshaft drive side Vespa PX (since 1984), T5 125cc, Cosa)
BGM1034
The item is ordered and will be in stock soon
€11.90
*
*incl. VAT plus shipping costs
RECOMMENDED
Kingwelle
KW0041
Clutch -KINGWELLE DragBikeClutch aluminium version- Vespa PX, T5, Rally, Cosa
KW0041
The item is ordered and will be in stock soon
€577.99
*
*incl. VAT plus shipping costs
Ersatzteile
Recently viewed items