Crankshaft -CM Standard- Minarelli 50cc horizontal (for 10mm gudgeon pin)

Preview: Crankshaft -CM Standard- Minarelli 50cc horizontal (for 10mm gudgeon pin)

Description

With the CM Standard Crankshaft we can offer you an inexpensive crankshaft that is a direct replacement for your original shaft. With brand-new gears and grooves, screwing is fun again.

Similar to the original shafts you will find sufficiently dimensioned lubrication holes and slots.
_{AI-translation}

€96.54 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)

P For this item you get fidelity point/s

Bearings
sizes:	10x14x13mm
Gudgeon pins
diameter:	10 mm
Crankshafts
stroke:	39.2 mm
thread rotor side:	M10x1,25 right-hand thread
thread drive side:	M10x1,25 right-hand thread
diameter crankwebs:	71.9 mm
width crankwebs:	37.8 mm
diameter bearing seat rotor side:	20 mm
diameter bearing seat drive side:	20 mm
diameter oil seal seat rotor side:	20 mm
diameter oil seal seat drive side:	20 mm
full circle crankshaft:
rotary valve crankshaft:
crankcase has to be milled:
engine casing has to be modified:
diameter variator pivot:	12.8 mm
variator pivot type:	toothed
can be used with genuine variator:	yes
Connecting rods
length connecting rod:	80 mm
thickness connecting rod:	5.2 mm
diameter small end connecting rod eye:	14 mm
lubricating hole at small end bearing:	yes
diameter crankpin:	16 mm
lubricating hole at crankpin bearing:	slot
crankpin shims:	no