Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Crankshaft -BGM Pro HPC Competition 60mm stroke, 110mm conrod- Lambretta DL/GP 125cc, 175cc, 200cc, 225cc, 250cc

BGM11060N
Crankshaft -BGM Pro HPC Competition 60mm stroke, 110mm conrod- Lambretta DL/GP 125cc, 175cc, 200cc, 225cc, 250cc
Crankshaft -BGM Pro HPC Competition 60mm stroke, 110mm conrod- Lambretta DL/GP 125cc, 175cc, 200cc, 225cc, 250cc
Crankshaft -BGM Pro HPC Competition 60mm stroke, 110mm conrod- Lambretta DL/GP 125cc, 175cc, 200cc, 225cc, 250cc
Crankshaft -BGM Pro HPC Competition 60mm stroke, 110mm conrod- Lambretta DL/GP 125cc, 175cc, 200cc, 225cc, 250cc
Crankshaft -BGM Pro HPC Competition 60mm stroke, 110mm conrod- Lambretta DL/GP 125cc, 175cc, 200cc, 225cc, 250cc

Description


When good things get even better, the bgm PRO Lambretta waves are now the bgm PRO Competition waves. The features that have proven themselves have remained, important technical details have been further improved.

    B>Enhanced features are:
  • Ground pressing surfaces for maximum stability of the joint and thus the highest possible torsional resistance
  • Ground and coated crank pin
  • Forged connecting rod with CNC finishing
  • Hardened and ground bearing and oil seal seats
  • Wider choice of stroke and connecting rod combinations than before
  • Quality assurance of each individual crankshaft through 100% testing by ISO and QC certified manufacturer

  • Full cheek shaft for increased pre-compression
  • Forged crank webs
  • Low-vibration engine running thanks to sophisticated balancing with hidden pockets, copper and tungsten counterweights
  • Lubrication of the lower connecting rod bearing via two large lubrication slots
  • Diameter of the crank pin 22 mm


The bgm PRO Competition shafts incorporate a total of 15 years of experience. Three more years of development work and tests have been carried out in the optimisation phase to create a shaft that offers maximum torsional resistance and stability.

In the English BSSO racing series, Team Replay has started the 2018 season with several bgm parts. Among others with the new and revised bgm crankshaft. Replay's rider Darren Conneely finished second in group 4.
AI-translation

 
This item is currently not available.
€349.00 *

incl. VAT plus shipping costs

The item is ordered and will be in stock soon
P For this item you get fidelity point/s
Bearings
sizes: 16x20x20mm
Gudgeon pins
diameter: 16 mm
Crankshafts
stroke: 60 mm
thread rotor side: M12x1,0 left-hand thread
thread drive side: M8x1,0 right-hand thread
diameter crankwebs: 95.9 mm
width crankwebs: 40.5 mm
diameter bearing seat rotor side: 25 mm
diameter bearing seat drive side: 25 mm
diameter oil seal seat rotor side: 33 mm
diameter oil seal seat drive side: 33 mm
full circle crankshaft:
filling material for full circle: steel
material balancing weights: copper, tungsten
rotary valve crankshaft:
crankcase has to be milled:
engine casing has to be modified:
Connecting rods
length connecting rod: 110 mm
thickness connecting rod: 7 mm
diameter small end connecting rod eye: 20 mm
lubricating hole at small end bearing: yes
diameter crankpin: 22 mm
lubricating hole at crankpin bearing: slot
crankpin bearing: silver cage bearing
crankpin shims: yes
Please inform me once the product is available again.
Customers alternatively searched for
Kurbelwelle | Welle | Kurbelwellen | Krukas | Vilebrequin | Cigüeñal | Albero | crankshaft | crank | Albero Motore
When good things get even better, the bgm PRO Lambretta waves are now the bgm PRO Competition...Continue reading

Ersatzteile


Cylinder base spacer -BGM PRO- Lambretta LI, LIS, SX 125-150, TV 175 (2nd series, 3rd series), DL/GP 125-150 - 3.0mm
variants bgm Pro
BGM0238
bgm Pro
Cylinder base spacer -BGM PRO- Lambretta LI, LIS, SX 125-150, TV 175 (2nd series, 3rd series), DL/GP 125-150 - 3.0mm
1 further versions from €9.90
  • Available immediately (delivery time 1-3 working days*)
    1.0mm
  • Available immediately (delivery time 1-3 working days*)
    1.5mm
  • Available immediately (delivery time 1-3 working days*)
    2.0mm
  • Available immediately (delivery time 1-3 working days*)
    2.5mm
Cylinder base spacer -BGM PRO- Lambretta SX 200, TV 200, DL/GP 200 - 3.0mm
variants bgm Pro
BGM0239
bgm Pro
Cylinder base spacer -BGM PRO- Lambretta SX 200, TV 200, DL/GP 200 - 3.0mm
1 further versions from €8.90
  • Available immediately (delivery time 1-3 working days*)
    1.0mm
  • Available immediately (delivery time 1-3 working days*)
    1.5mm
  • Available immediately (delivery time 1-3 working days*)
    2.0mm
  • Available immediately (delivery time 1-3 working days*)
    2.5mm
Recently viewed items