Write a review
Evaluations will be activated after verification.
Item successfully added.
Crankshaft -BGM ORIGINAL Standard (rotary valve) 48mm stroke, 105mm conrod- Vespa P80X, PX80
Part no.:
BGM031080G
Description
Solid BGM crankshaft for the PX80 models. The PX80 was manufactured for the German market and has a stroke of only 48mm (PX125 = 57mm). The most common damage to PX80 engines is a defective lower connecting rod bearing, usually caused by long idle times or worn connecting rod thrust washers.
The BGM crankshaft has a solid bearing here and also has no problems with the large tuning cylinders (125cc conversion cylinders, DR135, Malossi 139).
As a special feature, the BGM crankshaft has exactly the same intake timing angle as an original Piaggio crankshaft. This makes it the perfect 1:1 replacement for an original crankshaft. Compared to an original crankshaft, the balance factor has been improved and the intake area has been rounded and polished.
Delivery includes the upper connecting rod bearing. Order new crankshaft bearings and shaft seals if required. Installation tools and complete engine overhaul kits for simple and damage-free installation are of course also available in the store.
- Stroke: 48mm
- Piston pin Ø: 15mm
- Connecting rod length: 105mm
Suitable for all PX80 engines (V8X1T/V8X1M)
+----------+
Manufacturer Information
bgm
Kurt-Schumacher-Straße 1
50129 Bergheim - Germany
https://www.scooter-center.com/
info@scooter-center.com
Responsible Person for the EU
Scooter Center GmbH
Kurt-Schumacher-Str. 1
50129 Bergheim-Glessen - Germany
https://www.scooter-center.com/
info@scooter-center.com
€172.00 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| Bearings | |
|---|---|
| sizes: | 15x19x20mm |
| Gudgeon pins | |
| diameter: | 15 mm |
| Crankshafts | |
| stroke: | 48 mm |
| thread rotor side: | M12x1,25 right-hand thread |
| thread drive side: | M12x1,5 right-hand thread |
| diameter crankwebs: | 98 mm |
| diameter bearing seat rotor side: | 25 mm |
| diameter bearing seat drive side: | 25 mm |
| diameter oil seal seat rotor side: | 24 mm |
| diameter oil seal seat drive side: | 31 mm |
| full circle crankshaft: | |
| rotary valve crankshaft: | |
| crankcase has to be milled: | |
| engine casing has to be modified: | |
| Connecting rods | |
| length connecting rod: | 105 mm |
| diameter small end connecting rod eye: | 19 mm |
| Customers alternatively searched for | |
|---|---|
| Crankshaft | Crank | Kurbelwelle | Krukas | Vilebrequin | Cigüeñal | Albero | Albero Motore | Drehschieber | Vanne Rotative | Válvula Rotativa | Valvola A Disco Rotante | Rotary Valve | | |
Related items
bgm Pro
BGM1200TL
Bearing dummy crankshaft -BGM PRO- 613912 (25x62x12mm) - (used for crankshaft, drive side Vespa PX, T5 125cc, Rally180 (VSD1T), Rally200 (VSE1T), Sprint, GS150/GS3... - crankshaft, flywheel side, Sprint, GS150/GS3, VNA, VNB, VBA, VBB...)
BGM1200TL
The item is ordered and will be in stock soon
€12.30
*
*incl. VAT plus shipping costs
LML
1800030
Extractor -VESPA- bearing ring of bearing type NBI253815 (25x38x15mm) ignition side PX, Cosa, Sprint Veloce, LML 2-stroke, PK125 ETS
1800030
The item is ordered and will be in stock soon
€68.95
*
*incl. VAT plus shipping costs
Piaggio
1022313
Cluch nut tab washer -PIAGGIO- all Vespa Largeframe models (-1995) - clutch nut
1022313
The item is ordered and will be in stock soon
€2.59
*
*incl. VAT plus shipping costs
bgm Pro
BGM1034
Oil seal 31x62,1x5,8/4,3mm -BGM PRO FKM (E10/etahnol resistant) Metall, braun (used for crankshaft drive side Vespa PX (since 1984), T5 125cc, Cosa)
BGM1034
The item is ordered and will be in stock soon
€11.90
*
*incl. VAT plus shipping costs
RECOMMENDED
Kingwelle
KW0041
Clutch -KINGWELLE DragBikeClutch aluminium version- Vespa PX, T5, Rally, Cosa
KW0041
The item is ordered and will be in stock soon
€577.99
*
*incl. VAT plus shipping costs
Ersatzteile
Recently viewed items