Write a review
Evaluations will be activated after verification.
Item successfully added.
Crankcshaft -BGM PRO, direct intake, stroke = 60mm, conrod = 105mm- Vespa GS150 (VS1-5T), Motovespa 150GS (engine 04M), 150S (VTT, V13502C), 150 Sprint (engine 04M) - gudgeon pin Ø15mm (needle roller bearing)
Part no.:
BGM060105
Description
Crankshaft BGM PRO for Vespa GS150 and Motovespa 150 S, Sprint, GS models.
Made from high alloy forged blanks. The crankshaft is designed as a heavy duty tuning crankshaft, and has a 3mm longer stroke (60mm instead of 57mm). This gives the cylinder more displacement, but more important is the fine tuning of the timing angles of intake, exhaust as well as overflow.
Due to the angular function of the connecting rod, not all timing angles grow equally proportionally. While the exhaust changes only slightly, the timing angle of the overflow ports usually increases significantly. Adjusting the exhaust angle (lengthening) is important to get back the original advance exhaust angle (exhaust angle minus overflow angle divided by two). This provides the conditions for a solid performance increase.
Stroke: 60mm (also available as 57mm stroke version)
Connecting rod length: 105mm
Piston pin: Ø15mm
Connecting rod bearing: needle bearing (silver cage top and bottom)
A big advantage of the BGM PRO crankshaft compared to an original one is the use of a high quality connecting rod with needle bearing (instead of a plain bearing bushing) as well as a slotted lower connecting rod eye. The oil requirement is hereby significantly reduced so that the engines can be driven with today's high quality oils without problems even with 1:50 mixture.
The BGM PRO GS150 crankshaft fits the following vehicles:
Vespa: GS150 (all models: VS1-5T)
Motovespa 150GS (engine 04M), 150S (VTT, V13502C), 150 Sprint (engine 04M)
+----------+
Manufacturer Information
bgm
Kurt-Schumacher-Straße 1
50129 Bergheim - Germany
https://www.scooter-center.com/
info@scooter-center.com
Responsible Person for the EU
Scooter Center GmbH
Kurt-Schumacher-Str. 1
50129 Bergheim-Glessen - Germany
https://www.scooter-center.com/
info@scooter-center.com
€219.00 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| OEM numbers (for comparison purposes only) | |
|---|---|
| Piaggio | 026780, 59497, 26780 |
| Customers alternatively searched for | |
|---|---|
| Kurbelwelle | Krukas | Vilebrequin | Cigüeñal | Albero | Crankshaft | Crank | Albero Motore | |
Related items
variants
bgm Pro
BGM8092GS
Clutch 22Z (67) -BGM PRO Superstrong 2.0 Touring STD Ultralube - lining Cosa2 (steel/cork)- 22 teeth for primary wheel 67Z - Vespa Wideframe GS150 (VS1-VS5), GS160 (VSB1T), SS180 (VSC1T)
BGM8092GS
further versions from €329.00
-
The item is ordered and will be in stock soon22 teeth (for 67/68 teeth)
-
The item is ordered and will be in stock soon23 teeth (for 67/68 teeth)
RECOMMENDED
variants
bgm Pro
BGM8093GS
Clutch 23T (67) -BGM PRO Superstrong 2.0 Touring STD Ultralube - lining Cosa2 (steel/cork)- 23 teeth for primary wheel 67T - Vespa Wideframe GS150 (VS1-VS5), GS160 (VSB1T), SS180 (VSC1T)
BGM8093GS
further versions from €329.00
-
The item is ordered and will be in stock soon22 teeth (for 67/68 teeth)
-
The item is ordered and will be in stock soon23 teeth (for 67/68 teeth)
Alternative items
NEW
Pinasco
PN26482129
Engine casing incl. crankshaft (stroke=60mm) -PINASCO Super Slave (reed intake)- 4 studs Vespa Wideframe, faro basso (lamp down), Vespa 1953-1959, VM, VN, ACMA, VB1T, VGL1T, VL1T, GS150
PN26482129
The item is ordered and will be in stock soon
€1,549.00
*
*incl. VAT plus shipping costs
Recently viewed items