Write a review
Evaluations will be activated after verification.
Item successfully added.
Converter nut -BGM PRO- Piaggio Ciao, Bravo, Si, Boxer vehicles with variator
Part no.:
BGM5809
Description
The BGM Variomutter is characterized by its collar that goes about 4mm far into the variomatic, so it is ensured that the entire thread of the crankshaft is used.
The Variomutter was developed for the Polini Speedcontrol and Malossi Multivar.
The width across flats is 22mm. Outside diameter of the collar is ca.10mm.
When using the SC Variomutter, the locking plate is omitted.
We recommend medium strength threadlocker e.g. from Loctite item number: 3600015.
Tightening torque of the Vario nut is 20Nm.
Please do not tighten with an impact wrench!
+----------+
Manufacturer Information
bgm
Kurt-Schumacher-Straße 1
50129 Bergheim - Germany
https://www.scooter-center.com/
info@scooter-center.com
Responsible Person for the EU
Scooter Center GmbH
Kurt-Schumacher-Str. 1
50129 Bergheim-Glessen - Germany
https://www.scooter-center.com/
info@scooter-center.com
€5.80 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| OEM numbers (for comparison purposes only) | |
|---|---|
| Piaggio | 131331 |
| Customers alternatively searched for | |
|---|---|
| Variomutter | Reglermutter | Wandlermutter | Vario | Mutter | Kit | Vario | Mutter | Antriebsmutter | Variomutter | Variomatikmutter | Variatormutter | Kurbelwellenmutter | Variator | Nut | Kit Écrou Variateur | Kit Dado Puleggia Variatore | Kit Tuercas Vario | | |
Recently viewed items