Write a review
Evaluations will be activated after verification.
Item successfully added.
compression / torque spring -NARAKU- +1000 rpm Sport V.2
Part no.:
NK90066
Description
Back pressure springs NARAKU Sport V.2
The current version of the NARAKU back pressure spring uses a modified alloy of the spring steel and has a special marking of the spring type. Sets of 3 or 2 springs and single springs are available.
A change becomes necessary as soon as the performance increases due to a tuning measure. Noticeable by slipping V-belt or engines not spinning out. The back pressure spring is always in close connection with the variomatic. If a different spring is fitted, this will affect the shifting behavior of the variomatic. Unlike other manufacturers, the NARAKU springs indicate the speed shift at which the variator will shift if the rollers in the vario are not changed. This allows a much more precise selection of the correct spring than with a percentage specification. A 1000 spring will therefore make the vario change its ratio about 1000 rpm later.AI-translation
+----------+
Manufacturer Information
Naraku
Hai An Rd. 1F, No. 79, Ln. 500, Sec. 3
704 North Dist, Tainan - Taiwan
https://www.naraku.com/
info@naraku.com/
Responsible Person for the EU
Racing Planet
Löbstedter Str. 50
07749 Jena - Germany
https://www.racing-planet.de/
service@racing-planet.de
The current version of the NARAKU back pressure spring uses a modified alloy of the spring steel and has a special marking of the spring type. Sets of 3 or 2 springs and single springs are available.
A change becomes necessary as soon as the performance increases due to a tuning measure. Noticeable by slipping V-belt or engines not spinning out. The back pressure spring is always in close connection with the variomatic. If a different spring is fitted, this will affect the shifting behavior of the variomatic. Unlike other manufacturers, the NARAKU springs indicate the speed shift at which the variator will shift if the rollers in the vario are not changed. This allows a much more precise selection of the correct spring than with a percentage specification. A 1000 spring will therefore make the vario change its ratio about 1000 rpm later.
+----------+
Manufacturer Information
Naraku
Hai An Rd. 1F, No. 79, Ln. 500, Sec. 3
704 North Dist, Tainan - Taiwan
https://www.naraku.com/
info@naraku.com/
Responsible Person for the EU
Racing Planet
Löbstedter Str. 50
07749 Jena - Germany
https://www.racing-planet.de/
service@racing-planet.de
€11.69 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| General | |
|---|---|
| EAN: | 4250362416544 |
| Contrast springs | |
| outer diameter: | 52.2 mm |
| length: | 107.4 mm |
| wire size: | 3.87 mm |
| colour: | purple |
| OEM numbers (for comparison purposes only) | |
| Piaggio | AP8206191 |
| Customers alternatively searched for | |
|---|---|
| Gegendruckfeder | Kontrastfeder | Gdf | Variomatikfeder | Variofeder | Wandlerfeder | Federcontrast | Spring | Contrast Spring | Rear Pulley Spring | Ressort De Variateurs | Molla Contrasto | Muelle Antagonista | Muelle de contraste | | |
Available versions
Related items
Recently viewed items