Clutch nut M12 x 1.50 collar Ø=18.6mm h=9mm WS=15 -BGM PRO- (can be used as castle nut for Vespa PX, Rally180 (VSD1T), Rally200 (VSE1T), Sprint, T5 125cc, Cosa1)

Preview: Clutch nut M12 x 1.50 collar Ø=18.6mm h=9mm WS=15 -BGM PRO- (can be used as castle nut for Vespa PX, Rally180 (VSD1T), Rally200 (VSE1T), Sprint, T5 125cc, Cosa1)

Description

Very high quality BGM PRO special clutch nut for all Vespa Largeframe
Replaces the castle nut (used by Piaggio up to approx. 1990)

ADVANTAGES

Replaces the original clutch castle nut
Significantly higher tightening torque possible: >70Nm (not more than 100Nm)
Safe handling
No more special tools (crown nut wrench) required
Standard hexagon (width across flats 15)
Suitable for all Largeframe with old 6/7 spring clutch type

FITS
The nut is suitable for all vehicles built from 1950 onwards, e.g. V1-V5, VNB, VNA, GS150, GS160, Sprint, Rally, GT, GTR, T5, Cosa1, PX, PE etc...

Suitable for all Largeframe with old 6/7 spring clutch type

This nut completely replaces the old-fashioned castle nut and thus enables safe and precise work even with a torque wrench. In addition to the precise production, it is also suitable for a tightening torque of over 70Nm due to the use of steel with a hardness of 10 (in our internal tests we were able to load the nut with a tightening torque of 170Nm).
Conventional castellated nuts often give up at 40Nm. With the BGM nut, slipping and damage to the crankshaft/clutch hub due to a loose clutch nut is a thing of the past.

TECHNICAL DATA

Hardness: 10
Thread: M12x1.50 (with collar)
Diameter at collar: 18.6mm
Height: 9mm
Width across flats: 15
Incl. matching serrated lock washer

NOTE
The nut must not be fitted with an impact wrench. The nut has enormous toughness and tensile strength. However, due to its special design, which is due to the limited space available, it is not suitable for the extremely high load peaks of modern cordless impact wrenches. These not only easily reach twice the guaranteed tightening torque of the nut, but also generate load peaks that can no longer be absorbed by the elasticity of the nut. If the nut is tightened as prescribed using a conventional (manual) torque wrench, it is a very reliable and durable solution. Its large safety reserves far exceed those of the original nut.

Conclusion: No more slipping when loosening/tightening the nut and a bombproof clutch.

_{AI-translation}

+----------+
Manufacturer Information
bgm
Kurt-Schumacher-Straße 1
50129 Bergheim - Germany
https://www.scooter-center.com/
info@scooter-center.com

Responsible Person for the EU
Scooter Center GmbH
Kurt-Schumacher-Str. 1
50129 Bergheim-Glessen - Germany
https://www.scooter-center.com/
info@scooter-center.com

€6.76 *

excl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)

P For this item you get fidelity point/s

General
EAN:	4251389102823

Customers alternatively searched for
Kupplungsmutter \| Ersatz \| Kronenmutter \| M12 \| Hochfest \| Kupplungsmutter \| Kupplungsbefestigung \| KupplungssicherungsMutter \| Wandlermutter \| Kupplungsicherungsmutter \| Befestigungsmutter \| Kulumutter \| Clutch \| Nut \| Castle \| Castlenut \| Crown \| Crownnut \| Ecrou D'Embrayage \| Dado Fissa Frizione \| Tuerca Embrague \|