Clutch -KINGWELLE 4S-R DragBikeClutch- Vespa V50, V90, SS50, SS90, PV125, ET3, PK50, PK80, PK50 S, PK80 S, PK125 S, PK50 XL, PK125 XL, ETS, PK50 HP, PK50 SS
Description
Kingwelle Clutch Drag Bike Clutch - 4-disc for standard length auxiliary shaft.
The Kingwelle clutch is, like the famous Kingwelle crankshafts, a product born in racing. It is the final solution for all those who constantly demand everything from their extremely powerful engine. Be it in acceleration races or in ambitious race track operation. Engine power in the range of 40-70HP are conveyed by the Kingwelle clutches sovereign to the rear wheel.
By the use of extremely high-quality basic materials the clutch works nearly wear-free. However, all individual parts of the clutch are also available separately. The clutch kit also includes the clutch basket including (so-called) primary repair kit (reinforced cover plate for the springs of the shock absorber).
FEATURES
Real race clutch: controlled clutch engagement possible even at very high engine speeds
Very high load capacity:
4-disc clutch approx. 40-45hp (30-35Nm)
5-disc clutch approx. 50-70HP (40-45Nm)
Clutch springs are preloaded (clutch can be installed when vehicle is stationary)
Latest version (2022): Cover plate screwed again, no circlip = maximum stability even with hard springs.
All clutch types use the spring type of the PK XL2 clutches
AVAILABLE VERSIONS
4-discs for auxiliary shaft with standard length
4-discs for auxiliary shaft extended (DRT, Faio etc.)
5-discs for auxiliary shaft extended (DRT, Faio etc.)
SCOPE OF SUPPLY
Clutch basket incl. reinforced cover plate for the shock springs (4x M5x14 (10.9 Torx TX25)
Clutch springs (thickness XL)
Clutch facings with organic lining material (cork)
Clutch spider (inner basket)
Needle bearing clutch release bearing
Spacer kit 1mm (only for 5-disc version)
RECOMMENDATIONS
Oil fill quantity engine case: 400ml (600ml for Quattrini cases)
Oil type: Motul 7100 10W40
Clutch cover: Type Vespa PK XL2 (here the pressure mushroom presses centrally on the release bearing. In addition, the lever is reduced by a toothing = easier to pull)
Do not preload the lever so that the thrust bearing does not run under continuous load (danger of a defect of the release bearing whereby metal parts can get into the gearbox).
The clutch lever of the cover should be unactuated approx. 5-10mm in front of a 90° angle to the Bowden cable of the clutch cable. When the clutch lever is actuated, the clutch lever swings back and forth over the 90° angle => largest lever movement => maximum disengagement travel.
If spring stiffnesses are mixed, then only in symmetrical arrangement. Spring stiffnesses e.g. L or XL are different from manufacturer to manufacturer - do not mix!
incl. VAT plus shipping costs
| Customers alternatively searched for | |
|---|---|
Related items
BGM8910
