Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Center stand -BGM PRO Soft Stop V2 System Ø=20mm- V50, V90, PV125, ET3 - galvanised

BGM4962N
Center stand -BGM PRO Soft Stop V2 System Ø=20mm- V50, V90, PV125, ET3 - galvanised
Center stand -BGM PRO Soft Stop V2 System Ø=20mm- V50, V90, PV125, ET3 - galvanised
Center stand -BGM PRO Soft Stop V2 System Ø=20mm- V50, V90, PV125, ET3 - galvanised
Center stand -BGM PRO Soft Stop V2 System Ø=20mm- V50, V90, PV125, ET3 - galvanised
Center stand -BGM PRO Soft Stop V2 System Ø=20mm- V50, V90, PV125, ET3 - galvanised
Center stand -BGM PRO Soft Stop V2 System Ø=20mm- V50, V90, PV125, ET3 - galvanised
Center stand -BGM PRO Soft Stop V2 System Ø=20mm- V50, V90, PV125, ET3 - galvanised

Description


BGM PRO Main Stand V2 => now with adjustable stop

ADVANTAGE STOP RUBBER
The BGM PRO main stand with Soft Stop System puts an end to stand feet hitting hard on the floor plate. The stand stop is now positioned on the sturdy mounting plates on the central frame tunnel, as on the Vespa PX models.
The main stand is ideally stopped here via a rubber buffer without causing the floor panel to vibrate.
So not only is the noise when folding much more pleasant, the stand with Soft Stop technology also protects the frame. Cracks in the floor panel, caused by the original main stand, are thus forever history.

NEW Version V2
The stop rubber is now individually adjustable by means of thread. Thus, the main stand can be perfectly adjusted to the own vehicle as well as the desired distance to the frame. For example, the main stand can have an extra wide distance to the floor panel to be able to use it very comfortably at any time. On the other hand, the main stand can be adjusted close to the floor panel to always have maximum ground clearance available.


The Soft Stopkickstand is supplied with kickstand plates. These have additional run-up plates against which the main stand rests. This avoids direct contact between the stand tube and the frame and additionally protects the frame (ex works the original Piaggio stand rubs directly against the painted base plate!)

SUPPLY
For mounting longer screws are needed, these are enclosed in the set. The main stand spring and stand feet can of course be used from the original stand, but alternatively these can also be found in the accessories (below).

CONCLUSION: Very useful technical update, visually almost invisible!

AI-translation



+----------+
Manufacturer Information
bgm
Kurt-Schumacher-Straße 1
50129 Bergheim - Germany
https://www.scooter-center.com/
info@scooter-center.com

Responsible Person for the EU
Scooter Center GmbH
Kurt-Schumacher-Str. 1
50129 Bergheim-Glessen - Germany
https://www.scooter-center.com/
info@scooter-center.com
 
€58.91 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)
P For this item you get fidelity point/s
Customers alternatively searched for
Hauptständer | Ständer | Fahrzeugständer | Zentralständer | Aufbocken | Hochbocken | Mittelständer | Mittel | Zentral | Haupt | Center | Stand | Centre Stand | Center Stand | Main Stand | Prop Stand | Béquille Centrale | Cavalletto Centrale | Caballete Principal |

Available versions

Part no.: Colour Price Stock Cart Save
Part no.: BGM4961N Colour black Price
€58.91
Stock
The item is ordered and will be in stock soon
Cart
Save
Part no.: BGM4960N Colour chrome Price
€62.90
Stock
Available immediately (delivery time 1-3 working days*)
Cart Save
Part no.: BGM4962N Colour galvanised Price
€58.91
Stock
Available immediately (delivery time 1-3 working days*)
Cart Save

Ersatzteile


Nut -DIN 934- M6
Normfest
9901060
Normfest
Nut -DIN 934- M6
Available immediately (delivery time 1-3 working days*)
€0.60 *
*incl. VAT plus shipping costs
Self-locking nut -DIN 985- M6
Normfest
9901061
Normfest
Self-locking nut -DIN 985- M6
Available immediately (delivery time 1-3 working days*)
€0.60 *
*incl. VAT plus shipping costs
Washer -DIN 125- M6
Normfest
9901062
Normfest
Washer -DIN 125- M6
Available immediately (delivery time 1-3 working days*)
€0.65 *
*incl. VAT plus shipping costs
Spring washer -DIN 127- M6
Normfest
9901063
Normfest
Spring washer -DIN 127- M6
Available immediately (delivery time 1-3 working days*)
€0.39 *
*incl. VAT plus shipping costs
Screw -DIN 933- M6 x 25mm (8.8 tensile strength)
Normfest
9901067
Normfest
Screw -DIN 933- M6 x 25mm (8.8 tensile strength)
Available immediately (delivery time 1-3 working days*)
€0.79 *
*incl. VAT plus shipping costs
Center stand brackets -BGM PRO Soft Stop System- Vespa GS 150 VS1T-VS3T, VB1T
bgm Pro
BGM4950BR
bgm Pro
Center stand brackets -BGM PRO Soft Stop System- Vespa GS 150 VS1T-VS3T, VB1T
Available immediately (delivery time 1-3 working days*)
€9.90 *
*incl. VAT plus shipping costs
Recently viewed items