Write a review
Evaluations will be activated after verification.
Item successfully added.
Carburettor repair kit -BGM ORIGINAL- Dellorto PHBL24, PHBL25, PHBH 28, PHBH 30
Part no.:
3333490
Description
BGM PRO carburettor revision sets contain high-quality spare parts to restore an existing carburettor to its factory condition.
The set contains besides the gaskets also the very important float needle.
TIP: For a perfect sealing surface, refurbish the float needle seat (usually made of brass) with a cotton swab (Q-tip) and some chrome polish. This is important to remove possible residues, which are often found on carburettors that have been standing longer.
The basic setting of the mixture screw is usually between 1½ and 2½ revolutions. To do this, turn the mixture screw gently to the stop and then turn it out again by the above-mentioned value. The mixture screw determines how rich or lean the mixture is in the lower to middle range. An engine running too rich stutters (four-stroke) and does not reach speed properly. An engine that is tuned too lean will only reluctantly accept the throttle and tends to die off when suddenly accelerating. If the main jet and the choke function are ok, as a first measure the carburettor should be overhauled with a revision kit like the one offered here. After the basic adjustment the scooter should then have a stable idle and a good throttle response.
AI-translation
€17.90 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| Customers alternatively searched for | |
|---|---|
| Vergaserrevision | Kit | Vergaserreperatur | Kit | Vergaserüberholung | Vergaserrevision | Vergaserreparatur | Vergaserinstandsetzung | Revision | Reparatur | Instandsetzung | Überholung | Vergaser | Ersatzteile | Kleinteile | Leerlaufschraube | Luftschraube | Gemischschraube | Standgasschraube | Carburator | Repair | Kit | Carburettor | Carburetor | Carb | Pochette De Joints De Carburateur | Kit Revisione Carburatore | Kit Revisión Carburador | | |
Related items
Scooter Center
2599091KT
Cable choke kit (incl. pull and lever) -SCOOTER CENTER- Dell'Orto PHBH, PHBL, VHSA, VHSB für Vespa PX, T5, Rally, Sprint, GT/GTR, TS, Super, VNB, VBA, VBB
2599091KT
The item is ordered and will be in stock soon
€27.50
*
*incl. VAT plus shipping costs
variants
bgm Pro
BGM8504F
Float needle -BGM PRO- suitable for DELLORTO, quadrilateral, 4.5mm- SI (Vespa PX), SH (Lambretta LI series 3, LIS, SX, TV, DL, GP), PHBH, PHBL - spring loaded
BGM8504F
further versions from €6.90
-
Available immediately (delivery time 1-3 working days*)gefedert
-
Available immediately (delivery time 1-3 working days*)ungefedert
variants
bgm Pro
BGM8504S
Float needle -BGM PRO- suitable for DELLORTO, quadrilateral, 4.5mm- SI (Vespa PX), SH (Lambretta LI series 3, LIS, SX, TV, DL, GP), PHBH, PHBL - not spring loaded
BGM8504S
further versions from €6.90
-
Available immediately (delivery time 1-3 working days*)gefedert
-
Available immediately (delivery time 1-3 working days*)ungefedert
Ersatzteile
variants
bgm Pro
BGM8504F
Float needle -BGM PRO- suitable for DELLORTO, quadrilateral, 4.5mm- SI (Vespa PX), SH (Lambretta LI series 3, LIS, SX, TV, DL, GP), PHBH, PHBL - spring loaded
BGM8504F
further versions from €6.90
-
Available immediately (delivery time 1-3 working days*)gefedert
-
Available immediately (delivery time 1-3 working days*)ungefedert
variants
bgm Pro
BGM8504S
Float needle -BGM PRO- suitable for DELLORTO, quadrilateral, 4.5mm- SI (Vespa PX), SH (Lambretta LI series 3, LIS, SX, TV, DL, GP), PHBH, PHBL - not spring loaded
BGM8504S
further versions from €6.90
-
Available immediately (delivery time 1-3 working days*)gefedert
-
Available immediately (delivery time 1-3 working days*)ungefedert
Recently viewed items