Write a review
Evaluations will be activated after verification.
Item successfully added.
Carburator -MIKUNI 27mm TMX27- manual choke, Powerjet, autolube - CS=36mm
Part no.:
TM278006
Description
The carburettors from the Japanese manufacturer Mikuni are in the reference class when it comes to perfect tunability and thus the highest achievable performance with optimum consumption. Mikuni carburettors and parts are manufactured with tolerances of 5/1000ths. This is one of the reasons why they run so perfectly. However, you should take a little time for tuning, because Mikuni carburettors do not run with any carburettor equipment, but only with the really suitable one. But they run perfectly and you don't expose the engine to the risk that it only runs cleverly in some partial load ranges and then goes up in one of the other partial load ranges.
AI-translation
The TMX 27 also offers the possibility to tune the carburettor leaner in the medium speed and slide range with the Powerjet jet to gain power and reduce consumption. To avoid a lean tuning in the upper slide and speed range the Powerjet nozzle is used which delivers additional fuel into the intake flow due to the high vacuum at full throttle and high speeds. The TMX 27 is one of the few large carburetors with a connection for fresh oil. This makes this carburettor especially interesting for the large automatic engines that do not want to do without an oil pump in spite of tuning in everyday use. The Mikuni carburettors react quickly to fine contamination of the fuel with an overflow of the float chamber. Therefore, ideally use a good fuel filter here.
- Main nozzle: 150
- Idle jet: 30
- Needle jet: N-9 ( 622 )
- Nozzle needle: 6E20-3
- Starter nozzle: fixed
- Idle jet propeller: 2.0 turn
- Main air nozzle: fixed
- Power Jet nozzle: 85
- Gas slide: 4.0
- Needle valve: 2.5
- Float level: 13mm
- Choke actuation: left / lever
- Standing gas screw: left
- Air screw: left
- Outer diameter front: 36mm
- Outer diameter rear: 50mm
- Overall length: 88mm
- measurement center venturi up: 82mm
- measurement center venturi down: 77mm
- fresh oil connection: right
- fuel supply: left
AI-translation
€214.00 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| Carburettors | |
|---|---|
| size venturi: | 27 mm |
| size main jet: | 150 |
| main jet type: | Mikuni (4/042) |
| size pilot jet: | 30 |
| idle jet type: | Mikuni (VM22/210) |
| size needle: | 6E20 |
| needle type: | Mikuni |
| size atomiser: | N-9 (Serie 622) |
| power jet: | |
| size power jet: | 85 |
| power jet type: | Mikuni (N100606) |
| size slide: | 4 |
| slide type: | D-shaped slide |
| choke type: | manual lever |
| mounting type air filter: | rigid |
| connection size air filter: | 50 mm |
| mounting type intake manifold: | rubber mounted |
| connection size intake manifold: | 36 mm |
| idle gas screw: | left hand side |
| fuel/air mixture screw position: | left hand side |
| fuel hose position: | left hand side |
| depth: | 88 mm |
| connection height (relative): | 77 mm |
| material float chamber: | metal |
| connector for oil hose: | |
| vacuum connection: | |
| Customers alternatively searched for | |
|---|---|
| Vergaser | Vergaßer | Gaser | Zerstäuber | Carburator | Carburettor | Carburetor | Carb | Carburateur | Carburatore | Carburador | | |
Related items
Crazy Monkey Development
CMDMN0010
Throttle cable transmission box/roller - CMD Mystic Nautilus- (type N1), Quick action, throttle Ø50mm - universal
CMDMN0010
The item is ordered and will be in stock soon
€48.90
*
*incl. VAT plus shipping costs
Alternative items
Ersatzteile
Recently viewed items