Carburator -MIKUNI 24mm TMX24- manual choke - CS=30mm | Carburettors | Carburettor | Engines

Preview: Carburator -MIKUNI 24mm TMX24- manual choke - CS=30mm

Description

The carburettors from the Japanese manufacturer Mikuni are in the reference class when it comes to perfect tunability and thus the highest achievable performance with optimum consumption. Mikuni carburettors and parts are manufactured with tolerances of 5/1000ths. This is one of the reasons why they run so perfectly. However, you should take a little time for tuning, because Mikuni carburettors do not run with any carburettor equipment, but only with the really suitable one. This means that they run perfectly and you don't expose the engine to the risk that it only runs well in some partial load ranges and then goes up in one of the other partial load ranges.

The TM24s work very well on the 125-180cc 2-stroke Piaggio automatic engines. The basic setup already fits here mostly very well, usually only the main nozzle has to be adjusted. The carburettor even fits with the original rubber connection, as well as the carburettor and air filter. The Mikuni carburettors react quickly to fine contamination of the fuel with an overflow of the float chamber. Therefore, ideally use a good fuel filter.

Main jet: 190
Idle jet: 15
Needle jet: Q-0 ( 454 )
Nozzle needle: 5N14-3
Starter jet: fixed
Idle jet propeller: 1.25 turn
Main air nozzle: Fixed
Gas slide: 3.0
Needle valve: 2.5
Float position: 21mm
br />
Choke actuation: right / knob
Standing gas screw: left
Air screw: right
Outer diameter front: 31mm
Outer diameter rear: 44mm
Overall length: 75mm
measurement center venturi up: 60mm
measurement center venturi down: 58mm
fuel supply: left

_{AI-translation}

€184.00 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)

P For this item you get fidelity point/s

Carburettors
size venturi:	24 mm
size main jet:	190
main jet type:	Mikuni (4/042)
size pilot jet:	15
idle jet type:	Mikuni (VM22/210)
size needle:	5N14
needle type:	Mikuni
size atomiser:	Q-0 (Serie 454)
power jet:
size slide:	3
slide type:	flat slide
choke type:	manual button
mounting type air filter:	rigid
connection size air filter:	31 mm
mounting type intake manifold:	rubber mounted
connection size intake manifold:	44 mm
idle gas screw:	left hand side
fuel/air mixture screw position:	right hand side
fuel hose position:	left hand side
depth:	74 mm
connection height (relative):	58 mm
material float chamber:	metal
connector for oil hose:
vacuum connection: