Write a review
Evaluations will be activated after verification.
Item successfully added.
Carburator kit -MALOSSI MK 2 136 cc reed valve, 25mm Dellorto PHBL- Vespa V50, V90, PV125, ET3
Part no.:
1110004V2
Description
Carburettor kit -MALOSSI MK 2 136 ccm diaphragm- TypeV50 frame
Complete carburettor kit from Malossi for the MK2 cylinder.
With this kit you can convert your 136cc MK2 cylinder to a direct aspirated carburetor system. It comes with a plate to close off your naturally aspirated intake and re-fit it with a diaphragm box (hole punch 65mm) and its 4 flap diaphragm. The routing of the intake should fit all type V50 frames without much modification. We recommend to install a full cheek shaft to use the full potential of the direct intake. An individual jetting on your engine, should then be made.
Scope of delivery
25 PHBL carburetor with choke cable and throttle cable inside
Membrane box, intake manifold AW- 30mm
Air filter AW- 40mm
Connecting rubber AW- 30mm
Stuffer ,4 flaps diaphragm
gaskets, screws, clamps, closing plate
(TW291021]
€359.00 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| OEM numbers (for comparison purposes only) | |
|---|---|
| Malossi | 1615907, M1615907 |
| Customers alternatively searched for | |
|---|---|
| 1615907 | M1615907 | Vergaserkit | Vergaserset | Gaser | Zerstäuber | Vergaser | Set | Vergaser | Kit | Carburator | Kit | Carburettor | Carburetor | Carb | Kit Carburateur | Kit Carburatore | Kit Carburador | | |
Related items
variants
bgm Pro
BGM8504F
Float needle -BGM PRO- suitable for DELLORTO, quadrilateral, 4.5mm- SI (Vespa PX), SH (Lambretta LI series 3, LIS, SX, TV, DL, GP), PHBH, PHBL - spring loaded
BGM8504F
further versions from €6.90
-
Available immediately (delivery time 1-3 working days*)gefedert
-
Available immediately (delivery time 1-3 working days*)ungefedert
variants
bgm Pro
BGM8504S
Float needle -BGM PRO- suitable for DELLORTO, quadrilateral, 4.5mm- SI (Vespa PX), SH (Lambretta LI series 3, LIS, SX, TV, DL, GP), PHBH, PHBL - not spring loaded
BGM8504S
further versions from €6.90
-
Available immediately (delivery time 1-3 working days*)gefedert
-
Available immediately (delivery time 1-3 working days*)ungefedert
Ersatzteile
variants
bgm Pro
BGM8504F
Float needle -BGM PRO- suitable for DELLORTO, quadrilateral, 4.5mm- SI (Vespa PX), SH (Lambretta LI series 3, LIS, SX, TV, DL, GP), PHBH, PHBL - spring loaded
BGM8504F
further versions from €6.90
-
Available immediately (delivery time 1-3 working days*)gefedert
-
Available immediately (delivery time 1-3 working days*)ungefedert
variants
bgm Pro
BGM8504S
Float needle -BGM PRO- suitable for DELLORTO, quadrilateral, 4.5mm- SI (Vespa PX), SH (Lambretta LI series 3, LIS, SX, TV, DL, GP), PHBH, PHBL - not spring loaded
BGM8504S
further versions from €6.90
-
Available immediately (delivery time 1-3 working days*)gefedert
-
Available immediately (delivery time 1-3 working days*)ungefedert
Recently viewed items