Carburator kit -MALOSSI DELLORTO PHBH 30 BD, reed valve X360 V2.0- Vespa PX80, PX125, PX150, Sprint, Vespa Rally180 (VSD1T) - CS=34mm | Carburettor sets | Carburettor | Engines

Preview: Carburator kit -MALOSSI DELLORTO PHBH 30 BD, reed valve X360 V2.0- Vespa PX80, PX125, PX150, Sprint, Vespa Rally180 (VSD1T) - CS=34mm

Description

Carburettor kit -MALOSSI 30mm Dellorto PHBH BD, diaphragm X360

New V2.0 version of the X360 diaphragm intake manifold with 30mm Dellorto carburettor PHBH BD from Malossi. Fits all engine case variants of the large frame engines such as the Vespa Sprint, Rally, PX, Cosa.

Now with reduced clearance for engine cases with small sealing surface (T5 and PX80-150 with less than 60 millimeters sealing surface, measured between the holes for the carburetor mounting screws).

The newly added sealing surface inside the socket forms a strong flow edge, on housings with long sealing surface we recommend to mill the socket inside. Alternatively we recommend the intake manifold EVO1 from MMW.

As with all conversions to a diaphragm controlled intake, the original rotary valve control via crank web is omitted. Therefore, the engine case can and should be milled out (for optimal performance increase). Optionally, a crankshaft for diaphragm intake is recommended for a further increase in engine power.

Intake rubber stepless 360° adjustable
Good insulation of the carburettor against engine heat
Small installation height
Rubberized, self-sealing diaphragm body with 0,3mm carbon plates
Cover of the oil pump hole
Fits on engine cases with short or long sealing surface

Attention: For mounting it is necessary to screw two brass threaded bushings (enclosed) into the holes of the carburetor mounting screws of the engine case. The connecting piece itself is fixed to the engine case with two M5 hexagon socket screws.

Scope of delivery

Intake manifold incl. diaphragm
Throttle and choke cable
Gasket, clamp, screws for fastening
Spare connecting rubber
Carburettor 30mm Dellorto PHBH BD

(TW021221]

_{AI-translation}

+----------+
Manufacturer Information
Malossi
Via Roma 118
40012 Calderara di Reno - Italy
https://www.malossi.com/
info@malossi.com

Responsible Person for the EU
Malossi
Via Roma 118
40012 Calderara di Reno - Italy
https://www.malossi.com/
info@malossi.com

This item is currently not available.

€359.00 *

incl. VAT plus shipping costs

The item is ordered and will be in stock soon

P For this item you get fidelity point/s

OEM numbers (for comparison purposes only)
Malossi	M1615895, 1615895

Please inform me once the product is available again.

Customers alternatively searched for
1615895 \| M1615895 \| Vergaserkit \| Vergaserset \| Gaser \| Zerstäuber \| Vergaser \| Set \| Vergaser \| Kit \| Carburator \| Kit \| Carburettor \| Carburetor \| Carb \| Kit Carburateur \| Kit Carburatore \| Kit Carburador \|