Carburator -DELLORTO / SPACO SI20/20D- Vespa PX150 (1977-1984, type without autolube) - COD 588 | Carburettors | Carburettor | Engines

Preview: Carburator -DELLORTO / SPACO SI20/20D- Vespa PX150 (1977-1984, type without autolube) - COD 588

Description

Carburettor DELLORTO / SPACO SI20/20D Vespa PX150 (1977-1984, type without separate lubrication) - COD 588

Main air correction jet: 160
Mixing tube: BE3
Main jet:102
Auxiliary nozzle: 48/160
Slider: 6823.01

The carburettors of the same series only differ in their vehicle-specific equipment. This can be adapted however completely problem-free to each new application. Thus a 20/20D can also be suitably re-equipped for operation with a larger cylinder.

SEPARATELUBRICATION
Carburettors for vehicles with separate lubrication can also be used on vehicles without separate lubrication without any problems.

TUNING
If a larger cross-section is to be used, the SI20/20D carburettors can easily be exchanged for carburettors of the SI24/24E or SI26/26E series.

Likewise, older vehicles equipped with a smaller carburettor, such as a 20/15 or 20/17 SI, can be converted to a 20/20.

In both cases, the jetting must be adjusted accordingly.

NOTE: All new SI carburetors are manufactured under license by Spaco in India. These carburettors have been and are still used in Piaggio's series production for a long time. They are of the same quality level as the original Dell'Orto carburettors. They also go through the quality assurance at Dell'Orto and are therefore partly also delivered packed in Dell'Orto boxes.

_{AI-translation}

€94.00 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)

P For this item you get fidelity point/s

Carburettors
size venturi:	20 mm
size main jet:	102
main jet type:	Dellorto SI (4576)
size pilot jet:	48/160
idle jet type:	Dellorto SI (9892)
size air jet:	160
air jet type:	Dellorto SI (5827)
size choke jet:	60
choke jet type:	Dellorto SI (5582)
size atomiser:	BE3
power jet:
size slide:	6823.01
slide type:	flat slide
choke type:	manual, cable
mounting type air filter:	with screws
connection size air filter:	33 mm
mounting type intake manifold:	flange connection
connection size intake manifold:	60 mm
idle gas screw:	on top
fuel/air mixture screw position:	left hand side
fuel hose position:	right hand side
connection size fuel hose:	8 mm
height:	125 mm
width:	71 mm
depth:	80 mm
material float chamber:	metal
connector for oil hose:
vacuum connection:
OEM numbers (for comparison purposes only)
Piaggio	113549, 183096
Dellorto	00588