Carburator -DELLORTO / SPACO SI20/20D- Vespa PX125 Euro3 (2011-, type with catalyzer/autolub) - COD 585 | Carburettors | Carburettor | Engines

Preview: Carburator -DELLORTO / SPACO SI20/20D- Vespa PX125 Euro3 (2011-, type with catalyzer/autolub) - COD 585

Description

carburettor DELLORTO / SPACO SI20/20D Vespa PX125, PX150 Euro3 (2011-, type with catalyst/separate lubrication) - COD 585

main nozzle: 96
secondary nozzle: 45140
mixing tube: BE5
Main air correction nozzle: 140
Gas slide: 6823-11

The carburettors of the same series always differ only in their vehicle-specific equipment. However, this can easily be adapted to any new application. For example, a 20/20D can also be modified for operation with a larger cylinder.

separate lubrication
Carburettors for vehicles with separate lubrication can also be used on vehicles without separate lubrication.

TUNING
If a larger cross section is to be used, the SI20/20D carburettors can easily be exchanged for carburettors of the SI24/24E or SI26/26E series.

In both cases, the jetting must be adapted accordingly.

NOTE: All new SI carburettors are manufactured under licence by Spaco in India. These carburettors have been and are used in the series production of Piaggio for a long time. They are of the same quality as the original Dell'Orto carburettors. They also pass the quality assurance at Dell'Orto and are therefore partly also delivered packed in Dell'Orto cartons.

_{AI-translation}

€89.95 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)

P For this item you get fidelity point/s

Carburettors
size venturi:	20 mm
size main jet:	96
main jet type:	Dellorto SI (4576)
size pilot jet:	45/140
idle jet type:	Dellorto SI (9892)
size air jet:	140
air jet type:	Dellorto SI (5827)
size choke jet:	60
choke jet type:	Dellorto SI (5582)
size atomiser:	BE5
power jet:
size slide:	6823.11
slide type:	flat slide
choke type:	manual, cable
mounting type air filter:	with screws
connection size air filter:	33 mm
mounting type intake manifold:	flange connection
connection size intake manifold:	60 mm
idle gas screw:	on top
fuel/air mixture screw position:	left hand side
fuel hose position:	right hand side
connection size fuel hose:	8 mm
height:	125 mm
width:	71 mm
depth:	80 mm
material float chamber:	metal
connector for oil hose:
vacuum connection:
OEM numbers (for comparison purposes only)
Dellorto	00585