Write a review
Evaluations will be activated after verification.
Item successfully added.
Brake shoe pivot set front / spring mount -OLYMPIA- Vespa Sprint (1969-), GT125 (1969-) Super (1969-), GTR125 (VNL2T), TS125 (VNL3T), Rally180 (VSD1T), Rally200 (VSE1T)
Part no.:
3334167
Description
Brake pad bolt OLYMPIA for swingarm front fork Vespa Largeframe (ca.1969-1979)
The brake pad bolt is pushed through the swingarm and is at the same time the support for the lower spring mount of the shock absorber spring as well as the bolt on which the brake pads are pushed and fixed with a wire clip.
It is no longer bolted to the swingarm on models from 1969 onwards, but is fixed to the swingarm with an inserted sheet metal plate.
NOTE: Almost all brake pad bolts come from the Far East and are usually very short. Depending on the tolerances of all components and the width of the brake pads used, it can happen that the safety clip (Omega) of the brake shoes does not fit into the groove because they are covered by the pads. Then please look at the groove on the swing arm side for the plate and deburr if necessary. Alternatively, use other brake shoes that are somewhat narrower.
TIP: The perfect alternative is the BGM PRO brake pad bolt 'Made in Germany'. This is very high quality manufactured and has the correct dimensions.
€25.89 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| OEM numbers (for comparison purposes only) | |
|---|---|
| Piaggio | 2/35581, 78734, 2/78734 |
| Customers alternatively searched for | |
|---|---|
| Bremsbelagbolzen | Bolzen | Stift | Federbock | Federaufnahme | unten | Achse | Welle | Belagbolzen | Seegering | Bremsachse | Schwinge | Schwingenbolzen | Gabelbolzen | Bremsbolzen | Bremsbeläge | Backen | Beläge | Bremse | Bremsbelag | Bremsbacken | Bremsschuhe | Bremsklötze | Bremsbelege | Brake lining bolt | Pin | Spring bracket | Bottom | Axle | Shaft | Pad bolt | See ring | Brake axle | Swing arm | Swing arm bolt | Fork pin | Brake bolt | Brake pads | Shoe | Brake lining | Brake shoes | Boulon de garniture de frein | Boulon | Goupille | Support de ressort | En bas | Axe | Arbre | Boulon de garniture | Anneau de lac | Axe de frein | Bras oscillant | Boulon de bras oscillant | Boulon de fourche | Boulon de frein | Garnitures de frein | Mâchoires | Plaquettes | Frein | Bullone della guarnizione del freno | Perno | Supporto della molla | Fondo | Asse | Albero | Bullone della pastiglia | Vedi anello | Asse del freno | Braccio oscillante | Bullone del braccio oscillante | Perno della forcella | Bullone del freno | Pastiglie del freno | Scarpa | Guarnizione del freno | Ganasce del freno | Perno del forro de freno | Pasador | Soporte de muelle | Fondo | Eje | Perno de la pastilla | Ver anillo | Eje de freno | Brazo oscilante | Perno del brazo oscilante | Pasador de la horquilla | Perno de freno | Pastillas de freno | Zapata | Forro de freno | Zapatas de freno | |
Related items
RECOMMENDED
bgm Pro
BGM7707B
Spring bracket set (incl. spring plate and grease nipples) for front shock absorber, base fork/fork link (incl. needle roller bearing) -BGM PRO- Largeframe Sprint (VLB1T), Rally (VSD/VSE), GT/GTR125 (VNL2T), Super (VNC/VBC), TS125 (VNL3T), VNA, VNB,
BGM7707B
The item is ordered and will be in stock soon
€24.89
*
*incl. VAT plus shipping costs
Ersatzteile
RECOMMENDED
bgm Pro
BGM7707B
Spring bracket set (incl. spring plate and grease nipples) for front shock absorber, base fork/fork link (incl. needle roller bearing) -BGM PRO- Largeframe Sprint (VLB1T), Rally (VSD/VSE), GT/GTR125 (VNL2T), Super (VNC/VBC), TS125 (VNL3T), VNA, VNB,
BGM7707B
The item is ordered and will be in stock soon
€24.89
*
*incl. VAT plus shipping costs
Recently viewed items