Write a review
Evaluations will be activated after verification.

The fields marked with the asterisk * are mandatory.
Clicking on "Save" I accept the processing of my personal data in accordance with the Privacy statement of SCOOTER CENTER GmbH.

 
 
Item successfully added.

Bearing and oil seal set for crankshaft conversion to ETS -BGM PRO- Vespa V50, PV125, ET3, PK50, PK80, PK125 - 1x 6303 + 1x 6005 C3

BGM1113
Bearing and oil seal set for crankshaft conversion to ETS -BGM PRO- Vespa V50, PV125, ET3, PK50, PK80, PK125 - 1x 6303 + 1x 6005 C3
Bearing and oil seal set for crankshaft conversion to ETS -BGM PRO- Vespa V50, PV125, ET3, PK50, PK80, PK125 - 1x 6303 + 1x 6005 C3
Bearing and oil seal set for crankshaft conversion to ETS -BGM PRO- Vespa V50, PV125, ET3, PK50, PK80, PK125 - 1x 6303 + 1x 6005 C3
Bearing and oil seal set for crankshaft conversion to ETS -BGM PRO- Vespa V50, PV125, ET3, PK50, PK80, PK125 - 1x 6303 + 1x 6005 C3
Bearing and oil seal set for crankshaft conversion to ETS -BGM PRO- Vespa V50, PV125, ET3, PK50, PK80, PK125 - 1x 6303 + 1x 6005 C3

Description


The crankshaft of the Vespa PK125 ETS models has the most stable crankshaft stub of all Smallframe engines. It has a massive diameter of Ø25mm at the bearing seat on the alternator side and is therefore able to withstand all loads. The ETS crankshaft type is therefore very popular for tuned engines.

Due to the large diameter the crankshaft cannot be driven with the standard bearings/shaft seals. Therefore we offer this practical conversion kit with which any V50, 50N, V90, SS90, PV125, ET3 as well as PK S and PK XL engine type can be converted.

ASSEMBLY:
The enclosed circlip is inserted into the bearing bore of the alternator half. It is positioned so that the opening created between the ring ends opens the oil hole for the bearing. Then install the bearing 6005 as usual (cool down the bearing, heat the motor housing). The bearing on the drive side is installed as in a standard motor revision. Finally, the shaft sealing rings are inserted and the sealing lips are wetted with some oil (do not use grease).


AI-translation

 
€59.90 *

incl. VAT plus shipping costs

Available immediately (delivery time 1-3 working days*)
P For this item you get fidelity point/s
Customers alternatively searched for
Kugellager | Wellendichtring | Satz | Wedisatz | Kugellager | Lager | Lagersatz | Kugellagersatz | Motorlagersatz | Bearing | Oil | Seal | Set | Crankshaft | Bearing | Bearings | Rollers | Balls | Roulements & Pochette De Joints Spi Pour Vilebrequin | Kit Cuscinetti E Paraolio Per Albero Motore | Kit Rodamientos Y Retenes Para Eje De Cigüeñal | Bourrage |
The crankshaft of the Vespa PK125 ETS models has the most stable crankshaft stub of all...Continue reading

Fits the following vehicles


Recently viewed items