Write a review
Evaluations will be activated after verification.
Item successfully added.
Air intake hose Armadillo-BGM PRO- Lambretta LI, LIS, SX, TV (2nd series - 3rd series), DL, GP - Ø=40mm (Dellorto PHBL)
Part no.:
BGM2570D40
Description
bgm PRO intake hose with increased volume in front of the carburettor compared to the original intake hose. The intake hose is available with four different connection sizes at the carburettor: 40 mm (e.g. Dellorto PHBL 25), 42 mm (Dellorto PHBH 28-30), 45 mm (Mikuni TM24 and Jetex SH22) or 50 mm (Keihin PWK 28, Polini 28 - 30). The connection width at the air filter is 42 mm. This allows the hose to be used either with the original air filter box or with a foam air filter.
On the diagram provided under downloads is a direct comparison between the Lambretta dl/GP standard intake hose and the bgm. The comparison was made with Racetour cylinder 225, 58 mm stroke, Keihin 28 PWK, bgm air filter box and the bgm Big Box exhaust.
Another big advantage of the bgm PRO intake hose is the lower outlet. Here the Spitback from the carburetor is not collected in the hose and the idle system can not clog.
AI-translation
€19.90 *
incl. VAT plus shipping costs
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| Customers alternatively searched for | |
|---|---|
| Knie | Ansaugknie | Ansaugschlauch | Vergaserverbindung | Ansaugbalg | Ansauggummi | Faltenschlauch | Gummibalg | Luftschlauch | Ansaugleiter | Faltenbalg | Luftfilterkasten | Verbindungsgummi | Verbindungsschlauch | Air | Hose | Air Hose | Duct | Ducting | Elbow | Pipe | Tube | Tubing | Manchon Filtre À Air | Soffietto Aspirazione | Tubo De Aspiración | | |
Available versions
bgm PRO intake hose with increased volume in front of the carburettor compared to the original...Continue reading
Downloads:
Fits the following vehicles
- Lambretta (Eibar) LI 125 (series 2)
- Lambretta (Eibar) LI 150 (series 2)
- Lambretta (Eibar) TV 175 (series 2)
- Lambretta (Innocenti) LI 125 (series 1)
- Lambretta (Innocenti) LI 150 (series 1)
- Lambretta (Innocenti) LI 125 (series 2)
- Lambretta (Innocenti) LI 150 (series 2)
- Lambretta (Innocenti) TV 175 (series 2)
- Lambretta (Innocenti) GP 125 (DL 125)
- Lambretta (Innocenti) GP 150 (DL 150)
- Lambretta (Innocenti) GP 200 (DL 200)
- Lambretta (Innocenti) LI 125 (series 3)
- Lambretta (Innocenti) LI 150 (series 3)
- Lambretta (Innocenti) LI 125 Special (LIS 125)
- Lambretta (Innocenti) LI 150 Special (LIS 150)
- Lambretta (Innocenti) SX 150 (X 150 Special)
- Lambretta (Innocenti) SX 200 (X 200 Special)
- Lambretta (Innocenti) TV 175 (series 3)
- Lambretta (Innocenti) TV 200 (GT 200)
- Lambretta (Serveta) Jet 200
- Lambretta (Serveta) Lince 125
- Lambretta (Serveta) Lince 150
- Lambretta (Serveta) Lince 200
- Lambretta (Serveta) Special 125
- Lambretta (Serveta) Special 150
- Lambretta (Serveta) Scooterlinea 125
- Lambretta (Serveta) Scooterlinea 150
- Lambretta (Serveta) Scooterlinea 175
- Lambretta (Serveta) Scooterlinea 200
- Lambretta (SIL) GP 125
- Lambretta (SIL) GP 150
- Lambretta (SIL) GP 200
Blog
bgm PRO air intake hose for Lambretta- over 1HP more power for less than 20 Euro
bgm PRO air intake hose for Lambretta: more power, increased start-up performance, faithful to the original design In comparison with the standard intake hose, the bgm PRO air intake hose has a highe... Continue reading
Related items
variants
Normfest
9900003
Hose clamp -UNIVERSAL- 40-60mm - band width = 9mm
9900003
4 further versions from €1.49
-
Available immediately (delivery time 1-3 working days*)Ø=10-16mm (7.5mm)
-
Available immediately (delivery time 1-3 working days*)Ø=10-16mm (9mm)
-
Available immediately (delivery time 1-3 working days*)Ø=20-32mm (9mm)
-
Available immediately (delivery time 1-3 working days*)Ø=25-40mm (9mm)
Recently viewed items