Write a review
Evaluations will be activated after verification.
Item successfully added.
Adhesive -WÜRTH bond and seal- 70ml
Part no.:
3600025W
Description
Glues + Seals Black from WÜRTH
An adhesive that we have included in our range especially for our V 50 cascade in metal look (Art. No. 6950008). In addition, however, it is suitable for many other applications, regardless of whether it is gluing or sealing metal, painted surfaces, wood, stone, concrete and plastic (polyester and rigid PVC).
BOND + SEAL is moisture-curing and has excellent smoothing and grinding properties.
The temperature resistance ranges from -40° to +90°. For a short time (hours) even up to +120°.
Before application the surface must be clean, dry, free of grease and dust. The application temperature should be between +5° and +35°.
BONDED + SEALED takes a few hours to harden, but the connection is extremely strong. In the case of the cascade, it can only be removed from the bodywork with brute force. In short, the ideal adhesive for everything that should hold.
The use of BOND + SEAL as cylinder head sealant or similar is only recommended if they should never be separated again.
AI-translation/sub>
An adhesive that we have included in our range especially for our V 50 cascade in metal look (Art. No. 6950008). In addition, however, it is suitable for many other applications, regardless of whether it is gluing or sealing metal, painted surfaces, wood, stone, concrete and plastic (polyester and rigid PVC).
BOND + SEAL is moisture-curing and has excellent smoothing and grinding properties.
The temperature resistance ranges from -40° to +90°. For a short time (hours) even up to +120°.
Before application the surface must be clean, dry, free of grease and dust. The application temperature should be between +5° and +35°.
BONDED + SEALED takes a few hours to harden, but the connection is extremely strong. In the case of the cascade, it can only be removed from the bodywork with brute force. In short, the ideal adhesive for everything that should hold.
The use of BOND + SEAL as cylinder head sealant or similar is only recommended if they should never be separated again.
AI-translation/sub>
Available immediately (delivery time 1-3 working days*)
P
For this item you get
fidelity point/s
| Safety and hazard warnings | |
|---|---|
| hazard pictograms: |
|
| directive: | Complies with directive (EC) No. 1272/2008 and its adaptations. |
| signal word: | DANGER |
| product identifier: | EC 202-966-0: 4,4'-Methylenediphenyldiisocyanate |
| Hazard warnings - physical danger: | EUH204: Contains isocyanates. May produce an allergic reaction. |
| Hazard warnings - health hazard: | H334: May cause allergy or asthma symptoms or breathing difficulties if inhaled |
| Safety instructions - prevention: | P261: Avoid breathing dust/fume/gas/mist/vapours/spray., P285: In case of inadequate ventilation wear respiratory protection. |
| Safety instructions - reaction: | P304 + P341: IF INHALED: If breathing is difficult, remove victim to fresh air and keep at rest in a, P342 + P311: If experiencing respiratory symptoms: Call a POISON CENTER/doctor/... |
| Safety instructions - disposal: | P501: Dispose of contents/container to ... |
| Customers alternatively searched for | |
|---|---|
| Klebstoff | Klebstoff | Kleber | Dichtung | Klebstoffdichtung | Kleben | Dichtenglue | |
Alternative items
Recently viewed items